Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 1487642.015 - Streb Construction Co., Inc.

Inspection Information - Office: Iowa

Nr: 1487642.015Report ID: 0751910Open Date: 08/11/2020

Streb Construction Co., Inc.
Highway 61south Of Sperry Road
Burlington, IA 52601
Union Status: NonUnion
SIC:
NAICS: 237310/ Highway, Street, and Bridge Construction
Mailing: Po Box 5065null, Coralville, IA 52241

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/24/2020
Close Case:03/25/2021

Related Activity:TypeIDSafetyHealth
 Accident1640577    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $13,260 $0 $0 $0 $0 $13,260
Current Penalty $13,260 $0 $0 $0 $0 $13,260
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001A Serious 19100147 C04 I 02/08/2021 03/25/2021 $13,260 $6,630 $0 I - Informal Settlement
  2. 01001B Serious 19100147 F01 II 02/08/2021 03/25/2021 $0 $6,630 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 128515.015Event: 08/10/2020Employee Is Killed By Falling Concrete Conveyer Assembly
At 10:00 a.m. on August 10, 2020, an employee was working for a firm that constr ucted highways, streets, and bridges. He was the operator of a combination PS-27 00 Power Paver and CMI PS3202 two-track belt placer/spreader. At the time, two m aintenance workers were servicing the hydraulic system of the PS-2700 Power Pave r's conveyer belt. They were working on the PS-2700 Power Paver's CMI PS3202 con crete conveyor assembly. They had taken the conveyer assembly out of service in an elevated position, because one of its two hydraulic cylinder pistons was disp laced from the knuckle attachment. The two maintenance workers were actuating th e piston rod into its extended position so that they could temporarily weld the piston to the knuckle case. The maintenance workers could then lower the conveyo r belt to the ground, replace the hydraulic cylinders, and return the machine to service. As one maintenance worker was actuating the hydraulic piston, the mach ine operator was walking next the elevated conveyer belt. As the employee walked under the elevated conveyor system, the hydraulic system failed, and the belt a ssembly fell unexpectedly. The employee was struck by the falling equipment and was trapped between the belt assembly and the ground. The area around the machin e was not marked, and the employee was wearing a high visibility vest. He sustai ned multiple crushing injuries, and he was killed.
Keywords: belt conveyor, concrete, construction, conveyor belt, crushed, equipment operator, falling object, lockout, maintenance, road paving, struck by
Inspection Degree Nature Occupation
1 1487642.015 Fatality Equipment Operator: Heavy

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close