Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Alert: Due to routine maintenance on the OSHA website, some pages may be temporarily unavailable.
To report an emergency, file a complaint with OSHA or ask a safety and health question, call 1-800-321-6742 (OSHA).

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1467144.015 - 61550 - Hancock Mechanical Services Inc

Inspection Information - Office: Kentucky

Nr: 1467144.015Report ID: 0452110Open Date: 03/02/2020

61550 - Hancock Mechanical Services Inc
4427 Bishop Lnnull
Louisville, KY 40218
Union Status: NonUnion
SIC: 3550
NAICS: 332710/Machine Shops
Mailing: 4427 Bishop Lnnull, Louisville, KY 40218

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:07/07/2020
Close Case:

Related Activity:TypeIDSafetyHealth
Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $7,000 $0 $0 $0 $0 $7,000
Current Penalty $7,000 $0 $0 $0 $0 $7,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 338.31(1)(A) 08/14/2020 09/01/2020 $7,000 $7,000 $0 Z - Issued

Accident Investigation Summary
Summary Nr: 124557.015Event: 03/02/2020Employee Dies When Struck By Lathe
At approximately 8:30 a.m on February 29, 2020, an employee was running a vertic al turning lathe when the part (an aluminum donut) slipped out of the chuck and hit the door. Then, the door hit the employee forcefully. The employee was hos pitalized at the University of Louisville Hospital and later died from injuries sustained from the blunt force trauma. At 12:00 a.m on March 2, 2020, the emplo yer reported the death of the employee.
Keywords: blunt force trauma, lathe, struck by
Inspection Degree Nature Occupation
1 1467144.015 Fatality Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.