Inspection Detail
Case Status: VIOLATIONS UNDER CONTEST |
Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.
Inspection Information - Office: Albany | ||||
---|---|---|---|---|
Nr: 1460025.015 | Report ID: 0213100 | Open Date: 01/28/2020 | ||
Adm Milling Co. | ||||
201 Route 23b Hudson, NY 12534 | Union Status: Union | |||
SIC: | ||||
NAICS: 311211/Flour Milling | ||||
Mailing: 201 Route 23b, Hudson, NY 12534 | ||||
Inspection Type: | Fat/Cat | |||
Scope: | Partial | Advanced Notice: | N | |
Ownership: | Private | |||
Safety/Health: | Health | Close Conference: | 07/24/2020 | |
Close Case: | ||||
Related Activity: | Type | ID | Safety | Health |
Accident | 1538097 |
Case Status: VIOLATIONS UNDER CONTEST |
Violation Summary | ||||||
---|---|---|---|---|---|---|
Serious | Willful | Repeat | Other | Unclass | Total | |
Initial Violations | 3 | 3 | ||||
Current Violations | 3 | 3 | ||||
Initial Penalty | $36,627 | $0 | $0 | $0 | $0 | $36,627 |
Current Penalty | $36,627 | $0 | $0 | $0 | $0 | $36,627 |
FTA Amount | $0 | $0 | $0 | $0 | $0 | $0 |
Violation Items | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
# | ID | Type | Standard | Issuance | Abate | Curr$ | Init$ | Fta$ | Contest | LastEvent | |
1. | 01001 | Serious | 19100146 C02 | 07/24/2020 | $9,639 | $9,639 | $0 | 08/14/2020 | - | ||
2. | 01002 | Serious | 19100146 D01 | 07/24/2020 | 08/28/2020 | $13,494 | $13,494 | $0 | 08/14/2020 | - | |
3. | 01003 | Serious | 19100146 K01 | 07/24/2020 | 08/28/2020 | $13,494 | $13,494 | $0 | 08/14/2020 | - |
Accident Investigation Summary | ||||||
Summary Nr: 127804.015 | Event: 01/28/2020 | Employee Is Pulled Through Machine Nip Point And Is Killed F | ||||
At 10:00 a.m. on January 28, 2020, an employee entered the bonnet enclosure at the head of a centrifugal discharge bucket conveyor and was caught in a nip point between the moving belt on the down leg and a grate. The employee was pulled through the nip point and into the conveyor, sustaining multiple blunt force trauma injuries to his body. The employee was killed. | ||||||
Keywords: blunt force trauma, caught by, nip point | ||||||
Inspection | Degree | Nature | Occupation | |||
---|---|---|---|---|---|---|
1 | 1460025.015 | Fatality | Fracture | Machinery maintenance occupations |