Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 1291477.015 - Midwest Fabricating Company

Inspection Information - Office: Ca Long Beach District Office

Nr: 1291477.015Report ID: 0950635Open Date: 01/25/2018

Midwest Fabricating Company
8623 Dice Rdnull
Santa Fe Springs, CA 90670
Union Status: NonUnion
SIC:
NAICS: 332722/ Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Mailing: 8623 Dice Rdnull, Santa Fe Springs, CA 90670

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:05/11/2018
Close Case:12/11/2018

Related Activity:TypeIDSafetyHealth
 Accident1303799    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 6 3 9
Current Violations 6 3 9
Initial Penalty $86,400 $0 $0 $1,650 $0 $88,050
Current Penalty $43,200 $0 $0 $300 $0 $43,500
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203(A) 05/11/2018 05/31/2018 $100 $550 $0 05/25/2018 O - Administrative Law Judge Order
  2. 01002 Other 3314(G)(2)(A) 05/11/2018 05/31/2018 $100 $550 $0 05/25/2018 O - Administrative Law Judge Order
  3. 01003 Other 4203(B) 05/11/2018 05/31/2018 $100 $550 $0 05/25/2018 O - Administrative Law Judge Order
  4. 02001 Serious 3314(I)(1) 05/11/2018 05/23/2018 $1,800 $14,400 $0 I - Informal Settlement
  5. 03001 Serious 4190(B) 05/11/2018 $1,800 $7,200 $0 05/25/2018 O - Administrative Law Judge Order
  6. 04001 Serious 4197(A)(2) 05/11/2018 05/23/2018 $1,800 $14,400 $0 I - Informal Settlement
  7. 05001 Serious 4215(F) 05/11/2018 05/23/2018 $1,800 $14,400 $0 I - Informal Settlement
  8. 06001 Serious 3314(F) 05/11/2018 05/23/2018 $14,400 $14,400 $0 05/25/2018 O - Administrative Law Judge Order
  9. 07001 Serious 3314(G) 05/11/2018 05/25/2018 $21,600 $21,600 $0 05/25/2018 O - Administrative Law Judge Order

Accident Investigation Summary
Summary Nr: 102654.015Event: 01/24/2018Employee'S Finger Are Amputated By Power Press
At 4:45 p.m. on January 24, 2018, an employee was operating a Bliss C-110 power press that was equipped with a pullback operator restraint system, as well as a two push button system. The two button system is over ridden when the press is s witched into automatic or continuous mode. Also, the machine was designed to be used as a full cycle machine or be used in jog or inching mode. After using the press to form approximately 400 pieces, he noticed that the press was not formin g the pieces properly, requiring adjustment. The employee then called a coworker over to the press that was responsible for performing adjustments, who switched the press to automatic continuous mode without the employee knowing. As the emp loyee reached into the point of operation to retrieve a piece/part after the pre ss completed one full cycle, the die suddenly closed and amputated three of the employees fingers.
Keywords: amputation, caught in, finger, lockout/tagout, press
Inspection Degree Nature Occupation
1 1291477.015 Hospitalized injury Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close