Powered by GoogleTranslate

Inspection Detail

Inspection: 126198225 - Interstate Brands Corp

Inspection Information - Office: Los Angeles District Office

 

Inspection Nr: 126198225
Report ID: 0950641
Date Opened: 02/19/2008

Site Address:
Interstate Brands Corp
6007 St. Andrews Pl.
Los Angeles, CA 90047

Mailing Address:
, , 00000

Union Status: Union

SIC:2051

NAICS: 311812/Commercial Bakeries


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 03/28/2008

Emphasis:

Case Closed: 09/01/2009


Related Activity
Type Activity Nr Safety Health
Accident 101169035
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 3 4
Current Violations 4 4
Initial Penalty $18,000 $0 $0 $2,250 $0 $20,250
Current Penalty $0 $0 $0 $8,000 $0 $8,000
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 3314 G02 A 03/28/2008 04/22/2008 $500 $750 $0 04/15/2008 F - Formal Settlement  
2. 01002 Other 3314 H03 03/28/2008 04/22/2008 $0 $750 $0 04/15/2008 F - Formal Settlement  
3. 01003 Other 3314 J01 03/28/2008 04/22/2008 $500 $750 $0 04/15/2008 F - Formal Settlement  
4. 02001 Other 3314 C 03/28/2008 04/07/2008 $7,000 $18,000 $0 04/15/2008 F - Formal Settlement  

Investigation Summary

Investigation Nr: 201169653
Event: 02/06/2008
Worker Lacerates Hand in Cake Slicer

At approximately 5:55 p.m. on February 6, 2008, Employee #1, a mixer and acting foreman employed by Interstate Brands, a commercial bakery, was working in the slicing/filling area at the bakery. The machine that caused the injury is called a "Slabber," which is a cake slicer where filling is placed between the top and bottom halves of the cake after it is sliced. Employee #1 momentarily left the "Slabber" area while an engineer, the witness, came to assist another employee in unjamming the machine. The engineer opened the "Slabber" to remove excess cake when Employee #1 came back to the area and observed the engineer holding open the cover of the "Slabber." Employee #1 proceeded to assist the engineer in clearing excess cake out of the "Slabber," but he did not communicate with the engineer. The machine was plugged in at the time of the event, but it was the practice of Employee #1 to shut off the "Slabber" before opening it up. The blade appeared to be in the stationary position when Employee #1 came in contact with it. The engineer had not shut off the blade and realized that the machine took a few seconds to stop after the interlock was triggered. Employee #1, who usually turned off the machine before opening it, tried to help without fully knowing what was going on. The slicer blade lacerated Employee #1's left hand. Employee #1 was transported to the hospital, where he was admitted and treated for the laceration. He required 30 stitches. In addition, he was ordered not to work for six weeks after sustaining the injury. This event was investigated by Cal/OSHA. At the time of this report, citations that were to be issued to the employer included: General Failure of employer to have written lockout/tagout for cleaning, Section 3314(g)(2)(A) Failure of employer to conduct inspections of lockout/tagout, Section 3314(h)(3) Failure of employer to provide training on lockout/tagout, Section 3314(j) Serious Accident-Related Failure of employer to stop and de-energize/disengage moveable parts, Section 3314(c).

Keywords: FOOD PREPARATION, SLICER, CLEANING, MIXER, LOCKOUT, SAW, LACERATION, BLADE, COMMUNICATION, HAND

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 126198225 Hospitalized injury Cut/Laceration Miscelaneous food preparation occupations
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close