Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail



Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $0 $0 $0 $5,000 $0 $5,000
Current Penalty $0 $0 $0 $500 $0 $500
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 02/23/2009 02/26/2009 $500 $5,000 $0 03/04/2009 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 202540035 Event: 09/09/2008Employee Gets Right Leg Punctured By Metal Rod
On September 9th 2008 at 11:00 AM, a serious accident occurred when Employee #1, a hammer man, was trying to free a part that was stuck in the upper die of his forge. The usual practice to accomplish this is to insert a steel bar 0.25 inches thick in between the upper and lower die and drop the hammer. This action will knock the stuck part loose and it will fall out of the die. The bar was about 3 feet long and when the hammer dropped the bar flew backwards out from between the dies and struck the employee in the right leg, penetrating about 1.5 to 2 inches. He was transported to an emergency room for initial suturing and treatment. Two days later he was admitted to a hospital for surgery and debridement and was hospitalized for four days.
Keywords: die, stuck, hand tool, leg
Inspection Degree Nature Occupation
1 126153758 Hospitalized injury Cut/Laceration Forging machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close