Powered by GoogleTranslate

Inspection Detail

Inspection: 126110519 - Sani-Top, Inc.

Inspection Information - Office: Los Angeles District Office

 

Inspection Nr: 126110519
Report ID: 0950641
Date Opened: 04/22/2002

Site Address:
Sani-Top, Inc.
16634 S. Figueroa St.
Gardena, CA 90248

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:2541

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 06/13/2002

Planning Guide: Safety-Manufacturing

Emphasis:

Case Closed: 01/15/2004


Related Activity
Type Activity Nr Safety Health
Accident 362572984
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 2 1 3
Current Violations 2 1 3
Initial Penalty $22,500 $0 $0 $375 $0 $22,875
Current Penalty $16,605 $0 $0 $375 $0 $16,980
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citation Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 3203 A07 06/14/2002 07/16/2002 $375 $375 $0 -  
2. 02001 Serious 4300 A 06/14/2002 07/02/2002 $16,200 $18,000 $0 11/22/2002 F - Formal Settlement  
3. 03001 Serious 4296 J 06/14/2002 07/02/2002 $405 $4,500 $0 11/22/2002 F - Formal Settlement  

Investigation Summary

Investigation Nr: 201163433
Event: 04/04/2002
Employee Amputates Fingers In Unguarded Table Saw Blade

On April 4, 2002, Employee #1, a maintenance helper, was ripping formica board using a manually fed circular rip saw. The employer manufactures laminated plastic products for kitchen counter tops. Employee #1 was using a 10-inch tilting Arbor Saw manufactured by Delta, Model Number 36-943, Serial Number 00H88259. The 230 volt Delta Motor operated at 4,000 revolutions per minute (RPMs), with a blade measuring 10 by 126 by 0.625. Employee #1 was ripping stock approximately 0.75-inch thick, 10.375 by 25.50 in size. The piece was caught in the blade, which forced the employee's right hand into the unguarded moving saw blade. Employee #1 completely amputated his right index finger from the base, partially amputated his middle finger from the second digit, and seriously lacerated his thumb. No guard was in use to protect Employee #1 from the exposed saw blade. Also, the table saw was not equipped with a spreader and anti-kickback devices to prevent the stock from binding together and kicking back. Employee #1 was hospitalized.

Keywords: MAINTENANCE, AMPUTATED, FINGER, WORK RULES, CAUGHT BY, BLADE, UNGUARDED, TABLE SAW

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 126110519 Hospitalized injury Amputation Production helpers
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close