Translate
Inspection Detail
Inspection: 125968669 - Western Metal Lath & Steel Framing System
Inspection Information - Office: San Bernardino District Office
Site Address:
Western Metal Lath & Steel Framing System
6510 General Drive
Riverside, CA 92509
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3444
NAICS: 332322/Sheet Metal Work Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 07/27/2005
Emphasis:
Case Closed: 08/15/2015
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102441391 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 5 | 1 | 6 | |||
| Current Violations | 5 | 1 | 6 | |||
| Initial Penalty | $52,870 | $0 | $0 | $750 | $0 | $53,620 |
| Current Penalty | $39,090 | $0 | $0 | $0 | $0 | $39,090 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 A | 07/27/2005 | 08/19/2005 | $0 | $750 | $0 | 08/23/2005 | F - Formal Settlement | |
| 2. | 02001 | Serious | 3203 A07 F | 07/27/2005 | 08/10/2005 | $6,750 | $6,750 | $0 | 08/23/2005 | F - Formal Settlement | |
| 3. | 03001 | Serious | 3212 A01 | 07/27/2005 | 08/10/2006 | $6,750 | $6,750 | $0 | 08/23/2005 | F - Formal Settlement | |
| 4. | 04001 | Serious | 3704 | 07/27/2005 | 08/10/2005 | $6,750 | $8,435 | $0 | 08/23/2005 | F - Formal Settlement | |
| 5. | 05001 | Serious | 4187 A | 07/27/2005 | 08/10/2006 | $840 | $8,435 | $0 | 08/23/2005 | F - Formal Settlement | |
| 6. | 06001 | Serious | 4184 B | 07/27/2005 | 08/10/2005 | $18,000 | $22,500 | $0 | 08/23/2005 | F - Formal Settlement |
Investigation Summary
At approximately 7:47 p.m. on April 25, 2005, Employee #1, a machine operator helper, was walking through a passageway from the west side to the east side of a coil-slitting and processing line system. Employee #1 was pulled into the unguarded point-of-operation of the recoiler between the slit materials as it was being rewound on the recoiler's mandrel. Employee #1 was killed. The passageway was located between the recoiler, Serial Number 11169, and the tension stand Serial Number 11165, and under the exit feed table, and at the time of the accident, was approximately 7-feet long, 5-feet wide, and 4.5-to-5-feet high. The processing line system was a Braner USA, 50,000 lbs, 60 in., .105 in./.024 in., 1,000 fpm.
Keywords: CAUGHT BETWEEN, CRUSHED, MANDREL, POINT OF OPERATION, SLITTER, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 125968669 | Fatality | Other | Production helpers |