Translate
Inspection Detail
Inspection: 125630400 - New United Motor Manufacturing, Inc
Inspection Information - Office: Oakland District Office
Site Address:
New United Motor Manufacturing, Inc
45500 Fremont Blvd
Fremont, CA 94538
Mailing Address:
, , 00000
Union Status: Union
SIC:3711
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 02/02/2001
Emphasis:
Case Closed: 04/20/2004
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 361482284 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | 2 | |||
| Current Violations | 2 | 2 | ||||
| Initial Penalty | $18,000 | $0 | $0 | $350 | $0 | $18,350 |
| Current Penalty | $0 | $0 | $0 | $700 | $0 | $700 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 A07 | 02/05/2001 | 03/10/2001 | $350 | $350 | $0 | - | ||
| 2. | 02001 | Other | 3203 A04 | 02/05/2001 | 02/15/2001 | $350 | $18,000 | $0 | 03/02/2001 | J - ALJ Decision |
Investigation Summary
At about 3:00 p.m. on September 7, 2000, Employee #1 was lying under the lathe and when he pushed the leveling shims under the lathe base, the lathe became destabilized and fell onto him. He was rescued when five employees lifted up the lathe. Employee #1 was hospitalized and diagnosed to have sustained serious pelvic fracture injuries. Employee #1 started to work at 6:00 a.m. and was assigned the duty of installing a lathe machine which already was moved to a new location. To level the lathe for installation, a coworker lifted the lathe a few inches from ground so that the leveling shims could be installed under the lathe base. The coworker lifted the lathe by using a very small, about 2 inches wide, scissors type hydraulic jack only under one side of the lathe base.
Keywords: LATHE, INSTALLING, CAUGHT BY, CRUSHED, UNSTABLE POSITION
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 125630400 | Hospitalized injury | Fracture | Not specified mechanics and repairers |