Powered by GoogleTranslate

Inspection Detail

Case Status: VIOLATIONS UNDER CONTEST

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1237150.015 - Robinson Pharma

Inspection Information - Office: Ca Santa Ana District Office

Nr: 1237150.015Report ID: 0950631Open Date: 06/02/2017

Robinson Pharma
3330 S. Harbor Blvd.
Santa Ana, CA 92704
Union Status: NonUnion
SIC:
NAICS: 325411/Medicinal and Botanical Manufacturing
Mailing: 3330 S. Harbor Blvd., Santa Ana, CA 92704

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/14/2017
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1222101    
Case Status: VIOLATIONS UNDER CONTEST

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1 2
Initial Penalty $18,000 $0 $36,000 $0 $0 $54,000
Current Penalty $18,000 $0 $36,000 $0 $0 $54,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Repeat 3203(A) 08/14/2017 08/28/2017 $36,000 $36,000 $0 09/14/2017 -
  2. 02001 Serious 3314(C) 08/14/2017 08/28/2017 $18,000 $18,000 $0 09/14/2017 -

Accident Investigation Summary
Summary Nr: 96408.015Event: 05/31/2017Employee'S Fingertip Is Cut On Spinning Blade
At 9:45 p.m. on May 31, 2017, Employee #1 was asked to help with replacing springs in the Stick Machine. Before helping, the technician explained to the employee about the procedure and how the machine worked. After he pushed the spring in, the technician and the employee backed up about two feet, and the technician told the employee to test it. After testing the machine and the machine was running, the technician turned off the machine. But, there was a foil jammed in the machine and the technician asked the employee to pull out the foil. The machine was off, but because of the high RPMs, it was still spinning and was not in a complete stop. As the employee reached in to pull out the foil, the blade came down and cut the tip of Employee#1's right finger.
Keywords: struck against, lockout, laceration, blade, finger, machine guarding, jammed
Inspection Degree Nature Occupation
1 1237150.015 Non Hospitalized injury Cut/Laceration Packaging and filling machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close