Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: PENDING ABATEMENT OF VIOLATIONS

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1232555.015 - Process Cooling International Inc

Inspection Information - Office: Process Safety Management Unit - North

Nr: 1232555.015Report ID: 0950671Open Date: 05/11/2017

Process Cooling International Inc
5610 E. Olive Ave
Fresno, CA 93727
Union Status: Union
SIC:
NAICS: 811310/Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Mailing: 4812 Enterprise Way, Modesto, CA 95356

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/04/2017
Emphasis: S:Chemnh3, N:ChemnepClose Case:

Related Activity:TypeIDSafetyHealth
 Referral1211663   Yes
 Referral1211663 Yes  
Case Status: PENDING ABATEMENT OF VIOLATIONS

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 4 4
Current Violations 2 2
Initial Penalty $43,875 $0 $0 $0 $0 $43,875
Current Penalty $20,250 $0 $0 $0 $0 $20,250
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Serious 3314(G) 08/07/2017 08/17/2017 $0 $10,125 $0 09/25/2017 Y - State Decision
  2. 02001 Serious 3329(E) 08/07/2017 08/17/2017 $10,125 $10,125 $0 09/25/2017 J - ALJ Decision
Deleted 3. 03001 Serious 5189(F)(4) 08/07/2017 08/17/2017 $0 $13,500 $0 09/25/2017 J - ALJ Decision
  4. 04001 Serious 5189(H)(3) 08/07/2017 08/17/2017 $10,125 $10,125 $0 09/25/2017 J - ALJ Decision

Accident Investigation Summary
Summary Nr: 97568.015Event: 05/11/2017Uncontrolled Release Of Anhydrous Ammonia And No Employee Wa
At 7:15 a.m. on May 10, 2017, vapor phase anhydrous ammonia was released in an uncontrolled manner from a high-pressure line. The release took place when an employee drilled a 5/32-inch diameter pilot hole into a 3-inch schedule 40 seamless steel pipe containing anhydrous ammonia. The pilot hole was drilled as a starter hole for a ?-inch diameter pipe connection for a new auto-purger. No injuries or illness resulted from the incident. No harm to any employee occurred.
Keywords: ammonia, vapor
Inspection Degree Nature Occupation
1 1232555.015 Non Hospitalized injury Other Plumber, pipefitter and steamfiter apprentices

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close