Powered by GoogleTranslate

Inspection Detail

Case Status: CLOSED
Inspection: 1217896.015 - Duralum Products Inc.

Inspection Information - Office: Ca San Bernardino

Nr: 1217896.015Report ID: 0950633Open Date: 03/17/2017

Duralum Products Inc.
2485 Railroad Street
Corona, CA 92880
Union Status: NonUnion
SIC:
NAICS: 332322/Sheet Metal Work Manufacturing
Mailing: 8269 Alpine Avenue, Sacramento, CA 95826

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:07/13/2017
Close Case:10/23/2017

Related Activity:TypeIDSafetyHealth
 Accident1190679    
Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 1 4
Current Violations 2 1 3
Initial Penalty $41,400 $0 $0 $525 $0 $41,925
Current Penalty $18,450 $0 $0 $375 $0 $18,825
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Other 3203(A)(4) 07/17/2017 08/16/2017 $0 $525 $0 08/16/2017 J - ALJ Decision
  2. 02001 Other 3314(G)(1) 07/17/2017 08/01/2017 $375 $12,600 $0 08/16/2017 J - ALJ Decision
  3. 03001 Serious 3314(L)(1) 07/17/2017 08/01/2017 $2,250 $12,600 $0 08/16/2017 J - ALJ Decision
  4. 04001 Serious 3314(C)(1) 07/17/2017 08/01/2017 $16,200 $16,200 $0 08/16/2017 J - ALJ Decision

Accident Investigation Summary
Summary Nr: 97084.015Event: 03/10/2017Employee Amputates Fingers, Among Other Injuries, On Metal F
At 1:40 p.m. on March 10, 2017, an employee was operating a metal form roll machine (model number: RF18; serial number: 9770). The employee noticed the machine was not operating correctly so he informed his supervisor and foreman. The supervisor instructed the foreman to adjust and re-gauge his machine. The guards were taken off to perform these adjustments. The employee was instructed to feed the roll stock metal into the machine and start the machine in run mode. The supervisor and foreman were both adjusting the machine when one of the employee's fingers contacted the moving parts of the unguarded running machine. The employee was wearing a glove, which became tangled with the machine rollers. His left hand was pulled into machine, resulting in the amputation of his left thumb, index finger and middle finger, as well a fracture ring finger and wrist. The employee was taken by ambulance to Corona Regional Medical Center and immediately transferred to LAC, USC Medical Center, where he was hospitalized and underwent surgery.
Keywords: thumb, unguarded, lockout/tagout, finger, machine guarding, amputation
Inspection Degree Nature Occupation
1 1217896.015 Hospitalized injury Amputation

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close