Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: VIOLATIONS UNDER CONTEST

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1206239.015 - Hannibal Industries Inc.

Inspection Information - Office: Ca Long Beach District Office

Nr: 1206239.015Report ID: 0950635Open Date: 01/26/2017

Hannibal Industries Inc.
3851 S Santa Fe Ave
Los Angeles, CA 90058
Union Status: NonUnion
SIC:
NAICS: 331110 
Mailing: 3851 S Santa Fe Ave, Los Angeles, CA 90058

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:07/24/2017
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1176865    
Case Status: VIOLATIONS UNDER CONTEST

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 2 5
Current Violations 3 2 5
Initial Penalty $51,185 $0 $0 $1,275 $0 $52,460
Current Penalty $51,185 $0 $0 $1,275 $0 $52,460
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203(B)(2) 07/24/2017 08/10/2017 $425 $425 $0 08/17/2017 -
  2. 01002 Other 3203(A)(7) 07/24/2017 08/10/2017 $850 $850 $0 08/17/2017 -
  3. 02001 Serious 3383(B) 07/24/2017 08/10/2017 $19,125 $19,125 $0 08/17/2017 -
  4. 03001 Serious 23200002 A04 07/24/2017 $9,560 $9,560 $0 08/17/2017 -
  5. 04001 Serious 23200002 A05 07/24/2017 $22,500 $22,500 $0 08/17/2017 -

Accident Investigation Summary
Summary Nr: 97335.015Event: 01/25/2017Employee Receives Third-Degree Burns From Electrical Shock
At 2:00 p.m. on January 25, 2017, Employee #1 and a coworker were inspecting a newly installed resistor for the water pump within a cabinet of a 480 volt high frequency induction welder. Specifically, they were inspecting the resistor to determine why the newly replaced resistor was leaking water. The coworker replaced the resistor, removed the lock from the welder's power source, and ran the welder to see if the replacement of the resistor had stopped the water leak. However, his efforts were not successful. Just before the coworker's shift ended, he called Employee #1 over, who was starting his shift, to explain the problem and to ask that he continue work on the welder during his shift. With the welder running and the new resistor in place, Employee #1, for an unknown reason, moved closer to the inside of the welder's cabinet and came in contact with an energized part of the 480 volt welder. Employee #1 received an electrical shock to his right side, causing him to go into cardiac arrest. Emergency services were contacted and, upon arrival, were able to revive him. Employee #1 was taken to a nearby hospital where he was admitted and treated for third degree burns to his right arm and the right side of his abdomen.
Keywords: burn, electric shock, lockout/tagout
Inspection Degree Nature Occupation
1 1206239.015 Hospitalized injury Electric Shock Electricians

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close