Powered by GoogleTranslate

Inspection Detail

Inspection: 120328661 - Vlasic Foods, Inc.

Inspection Information - Office: Fresno District Office

 

Inspection Nr: 120328661
Report ID: 0950625
Date Opened: 09/27/1995

Site Address:
Vlasic Foods, Inc.
2410 S. Santa Fe
Visalia, CA 93279

Mailing Address:
Po Box 71, Visalia, CA 93279

Union Status: Union

SIC:0723

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 09/27/1995

Emphasis:

Case Closed: 07/29/1996


Related Activity
Type Activity Nr Safety Health
Accident 361388705
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 3 1 4
Current Violations 3 1 4
Initial Penalty $6,870 $0 $0 $185 $0 $7,055
Current Penalty $6,025 $0 $0 $185 $0 $6,210
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citation Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 4848 A 10/24/1995 11/24/1995 $185 $185 $0 11/28/1995 F - Formal Settlement  
2. 02001 Serious 3210 A 10/24/1995 10/03/1995 $90 $935 $0 11/28/1995 F - Formal Settlement  
3. 03001 Serious 3659 A 10/24/1995 10/09/1995 $935 $935 $0 11/28/1995 F - Formal Settlement  
4. 04001 Serious 3328 A 10/24/1995 09/27/1995 $5,000 $5,000 $0 11/28/1995 F - Formal Settlement  

Investigation Summary

Investigation Nr: 170717169
Event: 04/26/1995
Employee fractures skull in fall from catwalk

At approximately 10:20 a.m. on April 26, 1995, Employee #1, of Vlasic Foods, Inc., climbed a set of stairs to reach a 9 ft 4 in. high work platform/catwalk at the processing plant (nimbus tank area). The pumping system had been started when he momentarily leaned against a 54 to 59 in. wide gate. The gate swung open and Employee #1 fell to a concrete slab. He was transported to Kaweah Delta District Hospital, where he was admitted for a fractured skull. The gate Employee #1 fell through is normally held closed with a nut and bolt. The original nut and bolt had rusted and had been replaced by a stainless steel 1 7/16 in. by 10/32 in. thread diameter, with coarse thread, nut, and bolt, that was installed at a right angle to the axis of the integrated guardrail and gate system. The nut and bolt assembly was not equipped with a safety pin or other retaining device to prevent the nut from backing off. It appears that this, coupled with the vibration of the pumping/transfer system on the platform, caused the assembly to loosen. The nut had been installed finger-tight.

Keywords: FRACTURE, PIN, UNSECURED, AGRICULTURE, WORK RULES, VIBRATIONS, SKULL, BOLT, FALL, ELEVATED WORK PLAT

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 120328661 Hospitalized injury Fracture Shoe repairers
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close