Translate
Inspection Detail
Inspection: 119989549 - Stillman Seal
Inspection Information - Office: San Diego District Office
Site Address:
Stillman Seal
6020 Avenida Encinas
Carlsbad, CA 92009
Mailing Address:
, , 00000
Union Status: Union
SIC:3053
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 06/17/1994
Emphasis:
Case Closed: 06/19/1995
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362245474 | ||
| Accident | 362245482 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 3 | 2 | 5 | |||
| Current Violations | ||||||
| Initial Penalty | $7,875 | $0 | $0 | $950 | $0 | $8,825 |
| Current Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 23400023 | 06/17/1994 | 07/17/1994 | $500 | $500 | $0 | 07/07/1994 | J - ALJ Decision | Citation has been deleted. |
| 2. | 01002 | Other | 3203 A | 06/17/1994 | 07/17/1994 | $450 | $450 | $0 | 07/27/1994 | J - ALJ Decision | Citation has been deleted. |
| 3. | 02001 | Serious | 3314 G | 06/17/1994 | 07/17/1994 | $2,500 | $2,500 | $0 | 07/27/1994 | J - ALJ Decision | Citation has been deleted. |
| 4. | 03001 | Serious | 4000 D | 06/17/1994 | 07/17/1994 | $2,250 | $2,250 | $0 | 07/27/1994 | J - ALJ Decision | Citation has been deleted. |
| 5. | 04001 | Serious | 4582 A | 06/17/1994 | 07/17/1994 | $3,125 | $3,125 | $0 | 07/27/1994 | J - ALJ Decision | Citation has been deleted. |
Investigation Summary
Employee #1 was cleaning the in-rolls of a 24 in. rubber mill when his glove became caught between the rolls, which were set at 1/4 in. He was hospitalized with fractured fingers. The rolls were about 50 in. off the standing surface. The nip point was about 25 in. inward from the mill's toeboard. Because the mill is an older model, it is not equipped with point of operation guards, although an overhead trip rod was available for emergency stopping. Based on an estimated circumference of 37.68 in. (12 in. diameter), at 26 rpm, a surface travel distance of just over 14 in. is permitted. During the investigation, three tests were observed with surface travel distances of between 9 and 12 in. before stopping. Reaction time was not included and is not required by regulations. Additionally, the trip rod was incorrectly installed about 3 in. toward the operator.
Keywords: FRACTURE, FINGER, WORK RULES, CLEANING, LOCKOUT, ROLLER--MACH/PART, CAUGHT BETWEEN, POINT OF OPERATION, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 119989549 | Hospitalized injury | Fracture | Milling and planing machine operators |