Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail



Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1 2
Initial Penalty $14,400 $0 $0 $275 $0 $14,675
Current Penalty $550 $0 $0 $275 $0 $825
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 08/22/2000 08/25/2000 $275 $275 $0 -
  2. 02001 Serious 3384 B 08/22/2000 08/25/2000 $550 $14,400 $0 09/28/2000 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 201112547 Event: 02/18/2000Employee'S Finger Amputated In Drill Press
At approximately 9:00 a.m. on February 18, 2000, Employee #1 was operating a drill press in the machine shop of Kraft Tech, Inc. The press was equipped with a 2 in. diameter hole saw that Employee #1 was using to cut 1.5 in. diameter pipe sections for use as motorcycle frame backbones. As he worked, his gloved hand became snagged by the spinning hole saw, and his middle finger was partially amputated.
Keywords: clothing, amputated, finger, glove, machinist, metal shop, caught by, drill press, metal saw
Inspection Degree Nature Occupation
1 119940310 Non Hospitalized injury Amputation Drilling and boring machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close