Powered by GoogleTranslate

Inspection Detail

Inspection: 119916351 - Universal Cabinets, Inc.

Inspection Information - Office: Labor Enforcement Task Force (Letf) Unit - South

 

Inspection Nr: 119916351
Report ID: 0950645
Date Opened: 04/12/1994

Site Address:
Universal Cabinets, Inc.
2023 N. Preisker Lane, Suite B
Santa Maria, CA 93454

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:2434

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 04/15/1994

Planning Guide: Safety-Manufacturing

Emphasis:

Case Closed: 11/20/1998


Related Activity
Type Activity Nr Safety Health
Accident 362159709
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 2 2 4
Current Violations 2 2 4
Initial Penalty $3,655 $0 $0 $0 $0 $3,655
Current Penalty $3,375 $0 $0 $0 $0 $3,375
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Serious 4300 D 04/25/1994 05/09/1994 $375 $655 $0 06/02/1994 J - ALJ Decision  
2. 02001 Serious 4300 B 04/25/1994 05/09/1994 $3,000 $3,000 $0 06/02/1994 J - ALJ Decision  
3. 03001 Other 3241 A 04/25/1994 05/09/1994 $0 $0 $0 -  
4. 03002 Other 3203 B01 04/25/1994 05/09/1994 $0 $0 $0 -  

Investigation Summary

Investigation Nr: 170719454
Event: 03/30/1994
Employee injures fingers on sliding table saw blade

At about 1:30 p.m. on March 30, 1994, Employee #1 was using a sliding table saw, Altondorf model F45. This saw resembles a table saw except that it is mounted on a much larger table to handle 4-foot by 8-foot sheets of wood. Employee #1 had cut strips out of a 4 by 8 sheet of 3/4-inch thick wood. He then started cutting 4-inch pieces from the strips. He had cut about 4 to 6 pieces when he noticed that there were some chips on the pieces. He was going to adjust the height of the saw block when he put his right hand into the saw blade. His thumb was cut, the index and middle fingers were amputated to the 1st and 2nd joint, and his ring finger was amputated to the 2nd joint. There was a hood guard but the hood guard did not adjust automatically. Employee #1 stated that the hood guard was up about 1 1/2 to 2 inches.

Keywords: AMPUTATED, SAWYER, FINGER, WORK RULES, SAW, LACERATION, BLADE, UNGUARDED, TABLE SAW

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 119916351 Hospitalized injury Amputation Cabinet makers and bench carpenters
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close