Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 119821064 - Cnc Containers

Inspection Information - Office: Ca Pico Rivera

Nr: 119821064Report ID: 0950642Open Date: 04/26/2001

Cnc Containers
2110 Yates Ave
Commerce, CA 90240
Union Status: NonUnion
SIC: 3085/Plastics Bottles
NAICS: 326160/Plastics Bottle Manufacturing

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:09/18/2001
Planning Guide: Safety-Manufacturing Close Case:09/13/2010

Related Activity:TypeIDSafetyHealth
 Accident362614539    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3 6
Current Violations 3 3 6
Initial Penalty $24,750 $0 $0 $1,685 $0 $26,435
Current Penalty $18,300 $0 $0 $450 $0 $18,750
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203 B02 09/18/2001 10/05/2001 $300 $375 $0 12/07/2001 J - ALJ Decision
  2. 01002 Other 3203 A 09/18/2001 10/05/2001 $150 $560 $0 12/07/2001 J - ALJ Decision
  3. 01003 Other 3314 F 09/18/2001 10/05/2001 $0 $750 $0 12/07/2001 J - ALJ Decision
  4. 02001 Serious 3314 A 09/18/2001 10/05/2001 $18,000 $18,000 $0 12/07/2001 J - ALJ Decision
  5. 03001 Serious 4051 A 09/18/2001 10/05/2001 $300 $3,375 $0 12/07/2001 J - ALJ Decision
  6. 04001 Serious 4050 A 09/18/2001 10/05/2001 $0 $3,375 $0 12/07/2001 J - ALJ Decision

Accident Investigation Summary
Summary Nr: 201055407Event: 03/26/2001Employee Loses Finger When Locking Pin Crushed His Finger
At 4:00 p.m. on March 26, 2001, Employee #1 lost the tip of his right index finger when the mold locking pin came down and crushed his finger tip. His employer manufactures beverage plastic bottles by the process of blow molding. The accident occurred in Sidel blow mold line Number 8. Employee #1 performed a mold change-over task on Sidel line Number 8. After changing twelve bottle molds, Employee #1 tested the runs of the molds to see if the bottles came out in uniformity. Some bottles were defective in terms of not having the proper shape so Employee #1 turned off the Sidel blow mold machine and requested for assistance. A mechanic was called to come over to Sidel line Number 8 and assisted Employee #1 to clear the clogged water cooling line of the mold station Number 11. When Employee #1 opened the mold, the mold locking pin suddenly came down and crushed his right index finger tip. The Division determined that the contributing cause was the mechanical energy of the mold locking pin mechanism was not blocked out or dissipated to prevent the mold locking pin from inadvertent movement before the mold could be opened for cleaning. Employee #1 was transported to Kaiser Permanente for emergency treatment.
Keywords: amputated, pin, finger, crushed
Inspection Degree Nature Occupation
1 119821064 Non Hospitalized injury Amputation Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close