Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 119819787 - G & G Mfg Inc

Inspection Information - Office: Ca Pico Rivera

Nr: 119819787Report ID: 0950642Open Date: 01/22/2003

G & G Mfg Inc
4903 Everett Ct
Vernon, CA 90058
Union Status: NonUnion
SIC: 3299/Nonmetallic Mineral Products, Not Elsewhere Classified
NAICS: 327112/ Vitreous China, Fine Earthenware, and Other Pottery Product Manufacturing

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:05/09/2003
Close Case:09/13/2010

Related Activity:TypeIDSafetyHealth
 Accident362614430    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3 6
Current Violations 3 3 6
Initial Penalty $23,400 $0 $0 $895 $0 $24,295
Current Penalty $14,760 $0 $0 $200 $0 $14,960
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 25300043 B 05/09/2003 05/29/2003 $0 $275 $0 I - Informal Settlement
  2. 01002 Other 4324 A 05/09/2003 05/29/2003 $100 $310 $0 I - Informal Settlement
  3. 01003 Other 3203 A 05/09/2003 05/29/2003 $100 $310 $0 I - Informal Settlement
  4. 02001 Serious 4300 A 05/09/2003 05/29/2003 $180 $5,400 $0 I - Informal Settlement
  5. 03001 Serious 4310 A01 05/09/2003 05/29/2003 $180 $3,600 $0 I - Informal Settlement
  6. 04001 Serious 4318 A 05/09/2003 05/29/2003 $14,400 $14,400 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 119819787Event: 12/05/2002Employee Amputates Several Fingers At Planing Machine
At approximately 15:23 p.m. on December 5, 2002, an employee working for a company that manufactures decorative architectural fixtures suffered an accident while using a planing machine. At the time of the accident, the employee was planing a 2-inch by 4-inch piece of wood. The employee held the piece of wood with his left hand at the area of the rotating blade, and used his right hand to push the wood through the planer. While he was planing the 2 by 4, a knot on the piece of wood hit the blade, and caused the wood to jump. This caused the employee's left hand to contact the rotating blade, and he amputated several fingers. The employee was hospitalized for emergency treatment. The wood planer did not have a point of operation guard, and the guide was not properly set to accommodate the thickness of the wood being planed.
Keywords: amputated, planing machine, finger, guard, rotating knife, point of operation, blade, hand
Inspection Degree Nature Occupation
1 119819787 Hospitalized injury Amputation Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close