Powered by GoogleTranslate

Inspection Detail

Inspection: 119602381 - Marada Industries Incorporated

Inspection Information - Office: Department Of Labor, Licensing, And Regulation Division Of Labor And Industry Maryland Occupational Safety And Health

 

Inspection Nr: 119602381
Report ID: 0352420
Date Opened: 07/26/1993

Site Address:
Marada Industries Incorporated
151 Airport Drive
Westminster, MD 21157

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:3714

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 08/11/1993

Planning Guide: Safety-Manufacturing

Emphasis:

Case Closed: 04/01/1994


Related Activity
Type Activity Nr Safety Health
Accident 360618581
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 3 3
Current Violations 3 3
Initial Penalty $5,675 $0 $0 $0 $0 $5,675
Current Penalty $2,300 $0 $0 $0 $0 $2,300
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Serious 50104 A 12/01/1993 12/06/1993 $1,100 $2,925 $0 I - Informal Settlement  
2. 02001 Serious 19100022 C 12/01/1993 12/01/1993 $600 $1,375 $0 I - Informal Settlement  
3. 02002 Serious 19100024 B 12/01/1993 12/01/1993 $600 $1,375 $0 I - Informal Settlement  

Investigation Summary

Investigation Nr: 170749626
Event: 07/23/1993
Metal coils pin employee's leg against railing

On July 23, 1993, Employee #1, a met-form assistant, was working on the met-form line. When the two coils on the mandrel finished uncoiling, Employee #1 and a coworker went to the met-form staging area to ready the next two 5,200 pound coils to be placed on the mandrel. The two 5,200 pound coils, banded together with eight metal bands, were already sitting on the cradle. The coils are 66 inches tall and 66 inches across. The actual width of each coil is 6 inches. The coil cart that carries the coils to the mandrel was already under the two coils. The two metal support rods were already in place on the front of the coil cart and one metal support rod was in place on the rear of the cart. The metal support rods weigh approximately 54 pounds each and are on the coil cart to help stabilize the coils. A crane is used to bring the coils over to the cradle and, normally, the chains are left on the coils to help support them until they are firmly on the coil cart and the metal bands are cut and removed. When Employee #1 entered the "pit area" to remove the metal bands, the coil cart had not been snugged up underneath the coils and the chains from the crane were not supporting the coils. The crane was needed in another area. Employee #1 had finished cutting and pulling out seven of the eight metal bands on the coils and had started pulling the last metal band, when his coworker started snugging the coil cart up under the two coils, causing the coils to wobble. Both coils fell to the rear of the cart and struck the rear support rod, bending it instantly. The side of the falling coil brushed Employee #1's right leg and pinned his left leg against the safety railings. The safety railing was cut with a blowtorch to free Employee #1's leg. Employee #1 was treated at Carroll County General Hospital and received 21 stitches. He also sustained a hairline fracture to the fibia of his left leg. Specific written or verbal procedures addressing all of the possible hazards of moving the taller, unstable coils were not provided.

Keywords: FRACTURE, UNSECURED, PINNED, WORK RULES, FALLING OBJECT, LEG

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 119602381 Hospitalized injury Cut/Laceration Precision assemblers, metal
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close