Translate
Inspection Detail
Inspection: 111911509 - Ormega - Cal Industries
Inspection Information - Office: Modesto District Office
Site Address:
Ormega - Cal Industries
1900 San Guinetti Lane
Stockton, CA 95205
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3312
NAICS: 0
Inspection Type: Accident
Scope: Complete
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 11/20/1990
Emphasis:
Case Closed: 01/24/1991
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 361050081 | ||
| Complaint | 73569063 | Yes |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 7 | 8 | |||
| Current Violations | 1 | 7 | 8 | |||
| Initial Penalty | $150 | $0 | $0 | $0 | $0 | $150 |
| Current Penalty | $150 | $0 | $0 | $0 | $0 | $150 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 01/25/1991 | 10/01/1990 | $0 | $0 | $0 | - | ||
| 2. | 01002 | Other | 23400022 A | 01/02/1991 | 11/20/1990 | $0 | $0 | $0 | - | ||
| 3. | 01003 | Other | 3270 B | 01/25/1991 | 11/20/1990 | $0 | $0 | $0 | - | ||
| 4. | 01004 | Other | 3273 B | 01/25/1991 | 11/20/1990 | $0 | $0 | $0 | - | ||
| 5. | 01005 | Other | 3660 A | 01/25/1991 | 11/20/1990 | $0 | $0 | $0 | - | ||
| 6. | 01006 | Other | 3664 A01 | 01/25/1991 | 11/20/1990 | $0 | $0 | $0 | - | ||
| 7. | 01007 | Other | 461 A | 01/25/1991 | 11/20/1990 | $0 | $0 | $0 | - | ||
| 8. | 02001 | Serious | 4070 A | 01/25/1991 | 11/20/1990 | $150 | $150 | $0 | - |
Investigation Summary
On April 19, 1990, Employee #1 was using the light bender machine to bend short pieces of rebar into stirrups and ties. The machine is aligned by degrees and the employee holds both pieces of rebar while the machine bends them; the forward and reverse modes of the rebar bender are foot-operated and the emergency STOP button is readily accessible. Employee #1 was bending a short piece of rebar when his left foot apparently slipped and, instead of activating the emergency STOP, he stepped on the foot pedal. His left middle finger was crushed and had to be amputated.
Keywords: AMPUTATED, REBAR, FINGER, FOOT CONTROL, SLIP, BENDING MACHINE, CRUSHED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 111911509 | Non Hospitalized injury | Amputation | Misc. metal & plastic processing machine operators |