Powered by GoogleTranslate

Inspection Detail

Inspection: 111697173 - T.E.M. Co., Inc.

Inspection Information - Office: Minnesota Department Of Labor And Industry

 

Inspection Nr: 111697173
Report ID: 0552700
Date Opened: 11/05/1992

Site Address:
T.E.M. Co., Inc.
Crow Wing Cord 102
Aitkin, MN 56431

Mailing Address:
P.O. Box 349, Aitkin, MN 56431

Union Status: NonUnion

SIC:3599

NAICS: 0 


Inspection Type: Planned

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 11/05/1992

Emphasis: L:Si

Case Closed: 04/30/1993


Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $841 $0 $0 $0 $0 $841
Current Penalty $841 $0 $0 $0 $0 $841
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Serious 182065302 12/04/1992 12/10/1992 $841 $841 $0 12/22/1992 W - Empr Withdrew  

Investigation Summary

Investigation Nr: 814533
Event: 11/05/1992
Employee dies months after injury in work platform collapse

At 4:25 p.m. on November 3, 1992. Employee #1 and four other persons were repairing the rollers/bearings at the top of a short strand eliminator in a wood products manufacturing company. Employee #1 and two others had constructed a catch platform approximately 19 ft above the opening over the outbed conveyor. The platform was created by jamming one end of some 2 by 4s under the eliminator's final roller(s), resting the opposite ends on the end frame of the machine, and then placing a 4 by 8 ft sheet of wood on top of the 2 by 4s. The work of removing, repairing, and reinstalling the rollers progressed from the opposite end, and had reached the point at which the final roller holding the 2 by 4s was removed. Employee #1 then walked onto the platform. The entire platform slipped downward toward the end frame, causing the ends of the 2 by 4s to slip off the frame member under the roller. The entire platform system came apart and fell with Employee #1 through a vertical chute into the conveyor system below. The employee was hospitalized, and died on January 16, 1993.

Keywords: FRACTURE, REPAIR, UNSECURED, WORK RULES, UNSTABLE SURFACE, FALL, WORK PLATFORM

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 111697173 Fatality Fracture Millwrights
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close