Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 109196253 - Steward Machine Co., Inc. Plant #2

Inspection Information - Office: Birmingham

Nr: 109196253Report ID: 0418300Open Date: 08/12/1994

Steward Machine Co., Inc. Plant #2
3911 13th Avenue North
Birmingham, AL 35202
Union Status: NonUnion
SIC: 3599/Industrial and Commercial Machinery and Equipment, Not Elsewhere Classified
Mailing: P. O. Box 11008, Birmingham, AL 35202

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/22/1994
Planning Guide: Safety-Manufacturing Close Case:10/17/1994

Related Activity:TypeIDSafetyHealth
 Accident360673479    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 1 1
Initial Penalty $2,750 $0 $0 $0 $0 $2,750
Current Penalty $900 $0 $0 $0 $0 $900
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001A Serious 19100147 C05 IIA2 09/22/1994 10/12/1994 $1,375 $1,375 $0 I - Informal Settlement
  2. 01001B Serious 19100147 C05 IIC2 09/22/1994 10/12/1994 $900 $0 $0 I - Informal Settlement
  3. 01001C Serious 19100147 C06 I 09/22/1994 10/12/1994 $0 $0 $0 -
  4. 01001D Serious 19100147 C07 IV 09/22/1994 10/12/1994 $0 $0 $0 -
Deleted 5. 01002 Serious 19100305 J04 IIA 09/22/1994 10/04/1994 $1,375 $1,375 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 14546139Event: 08/09/1994Employee Dies, Another Hurt As Wrench Rotates On Drill Press
Employees #1 and #2 were trying to remove a 3 1/2 in. spade drill from the chuck of a radial drill press, using an 8 in. spanner wrench with a 5 ft cheater pipe attached. The drill press was a Csepel, type RFH100/3000, #73068, made in Hungary. Employee #1 contacted the start button of the drill press, which caused the spindle to start rotating. Employee #1 was struck in the side by the spanner wrench and Employee #2 fell over a small table while trying to avoid being struck. Both employees sustained contusions, Employee #1 to the abdomen and Employee #2 to the chest area. Employee #1 died.
Keywords: chest, wrench, rotating parts, abdomen, dismantling, work rules, lockout, drill press, struck by, contusion
Inspection Degree Nature Occupation
1 109196253 Non Hospitalized injury Bruise/Contus/Abras Occupation not reported
2 109196253 Fatality Bruise/Contus/Abras Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close