Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 1017776.015 - Southwest Fabrication, L.L.C.

Inspection Information - Office: Arizona Phoenix Sfty

Nr: 1017776.015Report ID: 0950411Open Date: 01/13/2015

Southwest Fabrication, L.L.C.
22233 N 23rd Avenull
Phoenix, AZ 85027
Union Status: NonUnion
SIC:
NAICS: 332312/Fabricated Structural Metal Manufacturing
Mailing: 22233 N 23rd Avenull, Phoenix, AZ 85027

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:01/20/2015
Close Case:05/21/2015

Related Activity:TypeIDSafetyHealth
 Referral932321 Yes  
 Accident933337    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 2 2
Initial Penalty $8,250 $0 $0 $0 $0 $8,250
Current Penalty $8,250 $0 $0 $0 $0 $8,250
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100212 A01 04/28/2015 $7,000 $7,000 $0 Z - Issued
  2. 01002A Serious 19100303 F02 04/28/2015 $1,250 $1,250 $0 Z - Issued
  3. 01002B Serious 19100303 G01 II 04/28/2015 $0 $0 $0 Z - Issued
  4. 01002C Serious 19100305 G02 III 04/28/2015 $0 $0 $0 Z - Issued

Accident Investigation Summary
Summary Nr: 70039.015Event: 01/12/2015Employee Is Caught By Machine Then Struck And Killed By Spin
At approximately 8:30 p.m. on January 12, 2015, an employee was operating a 2006 KINEFAC MC-75 FT/I (MC-80) Kine Roller Cylindrical Die Rolling Machine, Serial Number 1367. The KINEFAC machine was set for an infeed application of material that threads during the operating cycle. The KINEFAC had two 8 inch cylindrical dies that thread 2 inch diameter steel rebar to produce a precision thread at 2 .25 by 4.5 2A thread. The working space for the operator was approximately 27 in ches between the custom fabricated racking system and the KINEFAC MC-80 and appr oximately 18 inches from the rotating rebar. During the threading cycle the empl oyee approached the spinning rebar and his sweat shirt got caught by the spinnin g rebar which pulled him into the rotating material. The employee was killed as the result of an amputation of the left arm and blunt trauma to the body from t he spinning rebar. The company was using 18 foot 0.5 inch long by 2 inch diamet er steel rebar to be threaded for a final cage assembly.
Keywords: amputated, caught by, machine guarding, rebar, struck by
Inspection Degree Nature Occupation
1 1017776.015 Fatality Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close