Inspection Detail

Inspection: 317143055 - B&N Construction Inc.

Inspection Information - Office: Santa Ana District Office

Investigation Summary

On July 23, 2013, Employee #1, employed by B&N Construction Inc., was tasked with cutting a 6-inch PVC pipe at a commercial building worksite. He was operating a STIHL Cut-off Saw, Model Number TS 400, equipped with a fully guarded 12-inch blade. Employee #1 replaced the blade. When he reassembled the saw pieces, which included the bolts and a ring that held the blade at its center, either the pieces were not tightened sufficiently or the pieces were not in place. When he began to cut the pipe, the blade bound up in the pipe. Employee #1 struggled to pull the blade out of the pipe. The blade came loose and swung upwards. The guard on the saw cut his lower neck. Employee #1 was transported to the hospital, where he was admitted for treatment of a serious neck laceration. The employer reported this incident to Cal/OSHA on July 24, 2013. The subsequent investigation determined that Employee #1 had been a laborer working for this employer on and off for the past 25 years. He was employed full time by the employer when work was available. No other contracts were in force.

Keywords: CONSTRUCTION, ELECTRIC SAW, SAW, LACERATION, NECK, PIPE, HAND TOOL, BLADE