Translate
Inspection Detail
Inspection: 316344357 - Amesbury Group Dba Bandlock Corp
Inspection Information - Office: Monrovia District Office
Site Address:
Amesbury Group Dba Bandlock Corp
1734 S Vineyard Ave
Ontario, CA 91761
Mailing Address:
1734 S Vineyard Ave, Ontario, CA 91761
Union Status: NonUnion
SIC:3084
NAICS: 326122/Plastics Pipe and Pipe Fitting Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 01/03/2013
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 03/03/2015
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102715646 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 2 | 2 | 4 | |||
| Current Violations | 2 | 2 | 4 | |||
| Initial Penalty | $36,000 | $0 | $0 | $5,560 | $0 | $41,560 |
| Current Penalty | $18,405 | $0 | $0 | $3,225 | $0 | $21,630 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 01/03/2013 | 02/05/2013 | $3,000 | $5,000 | $0 | 02/04/2013 | F - Formal Settlement | |
| 2. | 01002 | Other | 3203 A | 01/03/2013 | 02/05/2013 | $225 | $560 | $0 | 02/04/2013 | F - Formal Settlement | |
| 3. | 02001 | Serious | 3384 B | 01/03/2013 | 01/13/2013 | $405 | $18,000 | $0 | 02/04/2013 | F - Formal Settlement | |
| 4. | 03001 | Serious | 4187 A | 01/03/2013 | 01/13/2013 | $18,000 | $18,000 | $0 | 02/04/2013 | F - Formal Settlement |
Investigation Summary
At approximately 2:15 p.m. on July 3, 2012, Employee #1 was operating a rolling machine in the coupler department of a facility that manufactures custom extrusion for the housing and construction industry . He was extending a 6 in. round by 8 in. in length piece of metal pipe with the rolling machine. The rolling machine was used to place a crease on the middle section of the pipe. The operation began with the insertion of the piping into the machine through an opening and the movement of a handle to the left to close the opening. After completion of the operation, the handle was moved to the right and another piece of pipe was inserted. The drive roller was spinning while this activity was taking place. As Employee #1 was about to release the cycled part, a burr caught his glove. The burr went through his glove into his right hand. The die automatically dropped. E1 was unable to stop the machine because the controls were on the right side and he could not reach that far. He was wearing Kevlar gloves. As soon as the machine stopped and released, Employee #1 pulled his right hand out. He sustained an unspecified amputation. A coworker gave him some rags to stop the bleeding, and Employee #1 ran to the office to report the incident. He was transported to a medical center, where he received treatment and was then hospitalized.
Keywords: AMPUTATED, GLOVE, CAUGHT BY, ROLLER--MACH/PART, HAND, MACHINE--MISC
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 316344357 | Hospitalized injury | Amputation | Occupation not reported |