Translate
Inspection Detail
Inspection: 314327248 - Rosal Auto Recyclers, Inc.
Inspection Information - Office: American Canyon District Office
Site Address:
Rosal Auto Recyclers, Inc.
4030 Folsom Court
Concord, CA 94520
Mailing Address:
4030 Folsom Court, Concord, CA 94520
Union Status: NonUnion
SIC:7549
NAICS: 488410/Motor Vehicle Towing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 11/10/2011
Emphasis:
Case Closed: 02/05/2019
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102690799 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | 2 | |||
| Current Violations | 2 | 2 | ||||
| Initial Penalty | $2,475 | $0 | $0 | $5,000 | $0 | $7,475 |
| Current Penalty | $0 | $0 | $0 | $3,025 | $0 | $3,025 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 11/15/2011 | 11/18/2011 | $2,750 | $5,000 | $0 | 11/23/2011 | F - Formal Settlement | |
| 2. | 02001 | Other | 4184 A | 11/15/2011 | 11/25/2011 | $275 | $2,475 | $0 | 11/23/2011 | F - Formal Settlement |
Investigation Summary
At approximately 2:15 p.m. on May 23, 2011, Employee #1 was preparing to make a cut with a Supershear Hydraulic Catalytic Converter Cutter. The Supershear Hydraulic Catalytic Converter Cutter used a hydraulic pressure to make shearing and cutting actions. An electrical pump created its hydraulic pressure, which was a part of the unit. The Supershear was mounted on a two-wheel cart with a two-button "on/off" switch that was located on the integrated power cable to control the cutting motion and facilitate one-man operation. Employee #1 lifted the Supershear at its top, which was at the shear point, and placed it on the cart. He was walking to the processing area to make the cut and had not touched the power switch before its activation. The "on/off" switch was still on the ground when the Supershear turned on. Upon its activation, Employee #1's left ring and pinky fingers were caught in the point of operation, which amputated both fingers. He was taken to a medical center, where he underwent surgical procedures and was then hospitalized for postoperative care. The causal factor was a failure to provide adequate point of operation guard(s) or other equivalent mean(s) of protection on the equipment.
Keywords: AMPUTATED, FINGER, GUARD, POINT OF OPERATION, HYDRAULIC PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 314327248 | Hospitalized injury | Amputation | Laborers, except construction |