Translate
Inspection Detail
Inspection: 314225624 - Dee Zee, Inc.
Inspection Information - Office: Iowa 0751910
Site Address:
Dee Zee, Inc.
1572 N.E. 58th Avenue
Des Moines, IA 50313
Mailing Address:
P.O. Box 3090, Des Moines, IA 50316
Union Status: NonUnion
SIC:3465
NAICS: 336370/Motor Vehicle Metal Stamping
Inspection Type: Referral
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 03/05/2010
Emphasis: L:Amputate, N:Amputate, S:Amputate, S:General Industry
Case Closed: 06/23/2010
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Referral | 200531952 | Yes |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 4 | 2 | 6 | |||
| Current Violations | 3 | 3 | 6 | |||
| Initial Penalty | $8,500 | $0 | $0 | $0 | $0 | $8,500 |
| Current Penalty | $5,250 | $0 | $0 | $1,100 | $0 | $6,350 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001A | Other | 19100147 C04 II | 04/21/2010 | 06/08/2010 | $1,100 | $2,125 | $0 | I - Informal Settlement | ||
| 2. | 01001B | Other | 19100147 C06 I | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | I - Informal Settlement | ||
| 3. | 01001C | Serious | 19100147 C07 I | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | - | ||
| 4. | 01001D | Serious | 19100147 C07 IV | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | I - Informal Settlement | Citation has been deleted. | |
| 5. | 01002 | Serious | 19100212 A03 II | 04/21/2010 | 06/08/2010 | $2,125 | $2,125 | $0 | - | ||
| 6. | 01003 | Serious | 19100334 A02 I | 04/21/2010 | 06/08/2010 | $2,125 | $2,125 | $0 | - | ||
| 7. | 01004A | Serious | 19101030 F01 IIB | 04/21/2010 | 06/08/2010 | $1,000 | $2,125 | $0 | I - Informal Settlement | ||
| 8. | 01004B | Serious | 19101030 H02 ID | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | I - Informal Settlement | Citation has been deleted. | |
| 9. | 02001 | Other | 19040032 B03 | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | - | ||
| 10. | 02002A | Other | 19101200 F05 I | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | - | ||
| 11. | 02002B | Other | 19101200 G08 | 04/21/2010 | 06/08/2010 | $0 | $0 | $0 | - |
Investigation Summary
"On February 26, 2010, Employee #1 was working on a 250 ton Cincinnati Mechanical press brake #3 (Serial Number 26416, Internal Number TBX006) by himself. Employee #1 was installing urethane strips into the point of operation (Die Area) to prevent scratches to the parts. The press brake was set up for foot controls and run mode at the time of the accident. As Employee #1 was installing the urethane strip, the press brake cycled, pinching his left hand in the point of operation. Coworker #1 was operating an industrial powered vehicle in a nearby aisle and saw Employee #1 hand stuck in the press brake. Employee #1 hand had been stuck in the point of operation for approximately three minutes before Coworker #1 arrived. Coworker #1 put the press brake in inch mode and moved the ram up off Employee #1 hand. Employee #1 was sat down and waited until ambulance arrived approximately ten minutes later. The press brake was locked out by Coworker #2 (electrical not pneumatic). Following the accident, everyone in the department was sent home the rest of the shift. Employee #1 had been running production parts and wearing proper PPE for the job. Employee #1 did not have the equipment locked out but was considered an authorized employee, had been trained as such, and had his own lockout lock provided by the company. Employee #1 did not speak English and was of oriental decent. Safe distance calculations had been performed for the light curtains by an outside contractor. No brand name, model number, or serial number were found on the light curtains and company could not provide this information. Safe distance calculations on this equipment was listed as 15.2 inches. Light curtains were set at approximately 12 inches, and were set at approximately 36.5 inches from ground level. The workrest was set at approximately 35.5 inches from ground level. The press brake was cleaned by company management officials but had not been operated prior to OSHA arrival."
Keywords: AMPUTATED, PPE, PRESS BRAKE, FINGER, FOOT CONTROL, LOCKOUT, POINT OF OPERATION, NIP POINT, PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 314225624 | Hospitalized injury | Amputation | Occupation Not Listed |