Powered by GoogleTranslate

Inspection Detail

Inspection: 313644254 - Vanciu Electric Inc

Inspection Information - Office: Long Beach District Office

 

Inspection Nr: 313644254
Report ID: 0950635
Date Opened: 10/25/2011

Site Address:
Vanciu Electric Inc
600 S Golden Shore
Long Beach, CA 90802

Mailing Address:
23862 Coronel Drive, Mission Viejo, CA 92691

Union Status: Union

SIC:1731

NAICS: 238210/Electrical Contractors


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 03/26/2012

Planning Guide: Safety-Construction

Emphasis: S:Construction (Cship)

Case Closed: 05/25/2013


Related Activity
Type Activity Nr Safety Health
Accident 101033942
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1 2
Initial Penalty $10,800 $0 $0 $85 $0 $10,885
Current Penalty $3,150 $0 $0 $85 $0 $3,235
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 1509 A 03/30/2012 04/10/2012 $85 $85 $0 -  
2. 02001 Serious 1511 B 03/30/2012 04/04/2012 $3,150 $10,800 $0 04/23/2012 F - Formal Settlement  

Investigation Summary

Investigation Nr: 202530978
Event: 10/25/2011
Employee Falls Into Basement Area

On October 25, 2011 Employee #1, a journeyman electrician/foreman was strapping the wires of a newly installed sensor into an air compressor tank while standing in an 18 inch floor space between the tank and the edge of a 5 by 5 opening leading to the wet well below. The general contractor was installing a 36 diameter spool (pipe) into pump No. 1 which was located in the wet well and the electrical company was finishing the last few details of their contract with the general contractor. At the time of the accident, the general contractor was connecting the 36 inch diameter spool which was a component of the pump of engine no. 1. The 5 ft by 5 ft. metal grating which covered bay 1 was temporarily removed so the spool could be lowered into position. Employee #1 was tacking the wires of the newly installed sensors on engine no. 1 into the tank of the motor. The area that he planned to secure the wires into was located between the tank and the edge of the 5 ft. by 5ft. opening, the cover of which had to be removed so the spool could be lowered. Employee #1 was standing on an 18 inch floor space between the tank and the edge of the opening. As Employee #1 finished his work, he stood up, stepped back and fell into the 5 ft. by 5 ft. opening of bay no. 1, down into the wet well, landing on top of the 36 inch diameter spool, having travelled only 9 of the 20 feet fall into water or catwalk. Employee #1 suffered 2 broken ribs, compound fracture on his hip plate, a broken tibia, bruises, had to undergo surgery and was hospitalized for 3 days.

Keywords: FRACTURE, TIBIA, RIB, CATWALK, FALL, TANK

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 313644254 Hospitalized injury Fracture Occupation not reported
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close