Translate
Inspection Detail
Inspection: 312669435 - West Coast Chain
Inspection Information - Office: Monrovia District Office
Site Address:
West Coast Chain
4245 Pacific Privado
Ontario, CA 91761
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3496
NAICS: 332618/Other Fabricated Wire Product Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 07/20/2012
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 10/04/2013
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102714201 | ||
| Accident | 102714219 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 4 | 5 | |||
| Current Violations | 1 | 4 | 5 | |||
| Initial Penalty | $18,000 | $0 | $0 | $1,260 | $0 | $19,260 |
| Current Penalty | $7,200 | $0 | $0 | $0 | $0 | $7,200 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 A | 07/20/2012 | 08/22/2012 | $0 | $135 | $0 | 07/26/2012 | F - Formal Settlement | |
| 2. | 01002 | Other | 3314 D | 07/20/2012 | 08/22/2012 | $0 | $685 | $0 | 07/26/2012 | F - Formal Settlement | |
| 3. | 01003 | Other | 3314 G | 07/20/2012 | 08/09/2013 | $0 | $305 | $0 | 07/26/2012 | F - Formal Settlement | |
| 4. | 01004 | Other | 3314 H | 07/20/2012 | 08/22/2012 | $0 | $135 | $0 | 07/26/2012 | F - Formal Settlement | |
| 5. | 02001 | Serious | 3314 J01 | 07/20/2012 | 07/30/2012 | $7,200 | $18,000 | $0 | 07/26/2012 | F - Formal Settlement |
Investigation Summary
On January 20, 2012, at approximately 9:00 a.m. Employee #1 was working as a machine operator. The employee was operating a punch press injection molding machine (Serial Number 200702-03556) and was performing setting up the operations for the machine. Employee #1 was unsupervised while working with the punch press. The employee was in process of setting up punch press for automated operation installing the die to be used for the order. When Employee #1 started the punch press machine. The employee noticed immediately that there were problems with the process. Employee #1 stopped the machine and looked to see if problem was visible. The employee then removed guards from the punch press to visually inspect the machine for the problem. Employee#1 observed a small obstruction at the point of operation and used his finger to remove it. The punch press' ram, which had a pneumatic clutch, was at the elevated position of the cycle and when the employee's finger entered the point of operation, the clutch released and the ram lowered onto the employee's finger, crushing it. The employee's left index finger was crushed to the knuckle. Employee #1 was transported to an area hospital, where his finger was amputated. The employee remained hospitalized.
Keywords: AMPUTATED, FINGER, MOLDING MACHINE, CLUTCH, CRUSHED, POINT OF OPERATION, PUNCH PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 312669435 | Hospitalized injury | Amputation | Occupation not reported |