Translate
Inspection Detail
Inspection: 311776017 - Rainier Wood Products Inc
Inspection Information - Office: Eugene
Site Address:
Rainier Wood Products Inc
1500 Tamarack St
Sweet Home, OR 97386
Mailing Address:
Po Box 277, Sweet Home, OR 97386
Union Status: NonUnion
SIC:2421
NAICS: 321912/ Cut Stock, Resawing Lumber, and Planing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 07/02/2008
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 04/19/2010
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $500 | $0 | $0 | $0 | $0 | $500 |
| Current Penalty | $100 | $0 | $0 | $0 | $0 | $100 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100147 C04 I | 07/16/2008 | 08/16/2008 | $100 | $500 | $0 | 08/07/2008 | L - State Settlement |
Investigation Summary
Lumber was being run through a Diehl Molder to reduce its width. Two boards jammed together under the top blade. The molder operator, without turning the machine off, raised the top blade, removed a guard and reached in to pick out the top board. The turning six inch molder blade caught his right thumb and pulled his hand into the blades. The molder removed all four fingers and the first joint of his thumb. The operator went to his foreman for help. First aid was applied, 911 called and the victim was transported to OHSU for corrective surgery
Keywords: AMPUTATED, FINGER, THUMB, JAMMED, LUMBER, BLADE, UNGUARDED, MACHINE--MISC
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 311776017 | Hospitalized injury | Amputation | Shaping and joining machine operators |