Translate
Inspection Detail
Inspection: 311602510 - Jerl Machine Inc.
Inspection Information - Office: Toledo Area Office
Site Address:
Jerl Machine Inc.
11140 Avenue Road
Perrysburg, OH 43511
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3549
NAICS: 333518/Other Metalworking Machinery Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 03/20/2008
Planning Guide: Safety-Manufacturing
Emphasis: L:Piv, N:Amputate, S:Amputations, S:Powered Ind Vehicle, S:Struck-By
Case Closed: 10/28/2008
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102105970 | ||
| Referral | 202099990 | Yes |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 4 | 4 | ||||
| Current Violations | 4 | 4 | ||||
| Initial Penalty | $7,000 | $0 | $0 | $0 | $0 | $7,000 |
| Current Penalty | $4,900 | $0 | $0 | $0 | $0 | $4,900 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 5A0001 | 07/15/2008 | 07/18/2008 | $525 | $750 | $0 | I - Informal Settlement | ||
| 2. | 01002A | Serious | 19100147 C04 I | 07/15/2008 | 08/08/2008 | $875 | $1,250 | $0 | I - Informal Settlement | ||
| 3. | 01002B | Serious | 19100147 C07 I | 07/15/2008 | 08/08/2008 | $0 | $0 | $0 | I - Informal Settlement | ||
| 4. | 01003 | Serious | 19100212 A01 | 07/15/2008 | 08/08/2008 | $1,750 | $2,500 | $0 | I - Informal Settlement | ||
| 5. | 01004 | Serious | 19100212 A03 II | 07/15/2008 | 08/08/2008 | $1,750 | $2,500 | $0 | I - Informal Settlement |
Investigation Summary
On March 20, 2008, Employee #1, a machine operator, was initializing a Toyoda 800 mm Horizontal Machining Center CNC machine. The CNC machine was 24 ft long and 14 ft wide with a door entrance of 45 in. wide and 93 in. high. He was standing in the machine's entranceway with the door opened, while a boring bit rated for 270 rpm in the spindle was warming up to a speed of 2500 RPM. As the boring bit rotated, it separated from the spindle and flew out the door, striking and killing Employee #1.
Keywords: MACHINE OPERATOR, SPINDLE, STRUCK BY, BORING MACHINE, FLYING OBJECT
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 311602510 | Fatality | Other | Occupation not reported |