Translate
Inspection Detail
Inspection: 310329057 - All Tech Manufacturing Ltd.
Inspection Information - Office: Cleveland Area Office
Site Address:
All Tech Manufacturing Ltd.
1477 Industrial Park
Akron, OH 44310
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3499
NAICS: 332999/All Other Miscellaneous Fabricated Metal Product Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 12/20/2006
Emphasis:
Case Closed: 03/25/2016
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 100104009 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 5 | 5 | ||||
| Current Violations | 4 | 1 | 5 | |||
| Initial Penalty | $6,750 | $0 | $0 | $0 | $0 | $6,750 |
| Current Penalty | $3,950 | $0 | $0 | $0 | $0 | $3,950 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 5A0001 | 12/21/2006 | 02/18/2007 | $2,500 | $3,500 | $0 | I - Informal Settlement | ||
| 2. | 01002 | Serious | 19100157 G02 | 12/21/2006 | 01/23/2007 | $450 | $750 | $0 | I - Informal Settlement | ||
| 3. | 01003 | Serious | 19100178 L04 III | 12/21/2006 | 12/27/2006 | $600 | $1,000 | $0 | I - Informal Settlement | ||
| 4. | 01004 | Serious | 19100242 B | 12/21/2006 | 12/27/2006 | $400 | $750 | $0 | I - Informal Settlement | ||
| 5. | 01005A | Other | 19101200 E01 | 12/21/2006 | 01/23/2007 | $0 | $750 | $0 | I - Informal Settlement | ||
| 6. | 01005B | Other | 19101200 H | 12/21/2006 | 01/23/2007 | $0 | $0 | $0 | I - Informal Settlement |
Investigation Summary
At approximately 11:00 a.m. on July 27, 2006, Employee #1 was doing a bar change on a CNC machine. These bar changes occur every six minutes. The doors on the CNC machine were open, and the employee had his head inside the machine to line up the bar stock. His hand was on the manual control to move the chuck in and out, when he inadvertently turned the control the wrong way, thus sending the chuck into his head, causing multiple head fractures. Employee #1 was killed. The employee had been with the company for only four days. There were no safe work procedures in place, and the employee was left alone to operate the CNC machine. In the four days of his employment, he was trained by two trained CNC operators. Both of the operators told the employer that the employee was not qualified to operate a CNC machine. The employee apparently spoke very little English. The employer was going to fire him at the end of the day; however, he continued to let the employee operate two CNC machines.
Keywords: FRACTURE, HEAD, MACHINE OPERATOR, STRUCK BY, UNTRAINED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 310329057 | Fatality | Other | Occupation not reported |