Translate
Inspection Detail
Inspection: 309300549 - Sterling Teal Inc
Inspection Information - Office: Santa Ana District Office
Site Address:
Sterling Teal Inc
2710 E Regal Park Drive
Anaheim, CA 92806
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:2869
NAICS: 325199/All Other Basic Organic Chemical Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 04/09/2008
Emphasis:
Case Closed: 05/26/2009
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102525524 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 5 | 6 | |||
| Current Violations | 6 | 6 | ||||
| Initial Penalty | $12,600 | $0 | $0 | $1,175 | $0 | $13,775 |
| Current Penalty | $0 | $0 | $0 | $2,325 | $0 | $2,325 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 461 A | 04/16/2008 | 05/16/2008 | $225 | $225 | $0 | 04/28/2008 | F - Formal Settlement | |
| 2. | 01002 | Other | 14300001 A02 | 04/16/2008 | 04/21/2008 | $225 | $225 | $0 | - | ||
| 3. | 01003 | Other | 25000008 A03 | 04/16/2008 | 05/16/2008 | $110 | $110 | $0 | - | ||
| 4. | 01004 | Other | 3382 A | 04/16/2008 | 04/24/2008 | $150 | $450 | $0 | 04/28/2008 | F - Formal Settlement | |
| 5. | 01005 | Other | 5144 C01 | 04/16/2008 | 05/16/2008 | $165 | $165 | $0 | - | ||
| 6. | 02001 | Other | 3203 A07 D | 04/16/2008 | 04/30/2008 | $1,450 | $12,600 | $0 | 04/28/2008 | F - Formal Settlement |
Investigation Summary
On October 16, 2007, Employee #1 was cutting 4-ft by 2 inch by 0.5-inch strips of soundboard material into 2.5-inch pieces with a Delta radial arm saw, Model Number 33-990, Serial Number 89J81913, located in the employer's outside storage area. Employee #1 was assisted by a coworker packing the cut pieces into boxes. Employee #1 stacked 12 strips (3 strips deep by 4 strips high) into a single unit measuring 2 inches high. Employee #1 placed the unit against the 1.5-inch fence at the back edge of the saw table. She pulled the rotating saw blade forward with her right hand. With her left hand, she positioned the unit behind the blade to begin cutting 2.5-inch pieces at the leading edge of the unit. Employee #1 continued to place her left hand on top of the stack. She pushed the blade back and as it contacted the unit, the action of the blade forced the unit and her left hand upwards. Employee #1's left hand moved in the direction of the blade, making contact and resulting in the amputation of her ring and small fingers and a laceration to the middle finger of the same hand. Cutting the fiberboard unit by placing it behind the blade and pushing the blade back to make the cut is contrary to proper cutting procedures outlined in the radial arm saw operator's manual. She was not hospitalized for her injury.
Keywords: AMPUTATED, FINGER, STRUCK AGAINST, SAW, LACERATION, PROCESS SAFETY, BLADE, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 309300549 | Non Hospitalized injury | Amputation | Laborers, except construction |