Translate
Inspection Detail
Inspection: 307456251 - Trend Technologies
Inspection Information - Office: San Bernardino District Office
Site Address:
Trend Technologies
4626 Eucalyptus Ave
Chino, CA 91710
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3499
NAICS: 332510/Hardware Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 07/19/2005
Emphasis:
Case Closed: 08/15/2015
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102440906 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 3 | 3 | 6 | |||
| Current Violations | 1 | 5 | 6 | |||
| Initial Penalty | $24,750 | $0 | $0 | $5,750 | $0 | $30,500 |
| Current Penalty | $2,700 | $0 | $0 | $5,450 | $0 | $8,150 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 07/19/2005 | 07/22/2005 | $5,000 | $5,000 | $0 | 08/15/2005 | F - Formal Settlement | |
| 2. | 01002 | Other | 3314 H03 | 07/19/2005 | 08/02/2005 | $0 | $375 | $0 | 08/15/2005 | F - Formal Settlement | |
| 3. | 01003 | Other | 5097 A | 07/19/2005 | 08/02/2005 | $150 | $375 | $0 | 08/15/2005 | F - Formal Settlement | |
| 4. | 02001 | Other | 4193 E02 | 07/19/2005 | 08/02/2005 | $0 | $3,375 | $0 | 08/15/2005 | F - Formal Settlement | |
| 5. | 03001 | Serious | 4214 A | 07/19/2005 | 08/02/2005 | $2,700 | $3,375 | $0 | 08/15/2005 | F - Formal Settlement | |
| 6. | 04001 | Other | 3314 C | 07/19/2005 | 08/02/2005 | $300 | $18,000 | $0 | 08/15/2005 | F - Formal Settlement |
Investigation Summary
At approximately 1:30 p.m. on February 8, 2005, Employee #1 was working on a Chicago Dries & Crump press brake, Model Number 810-R, Serial Number L-14104, to bend 20-inch by 7-inch metal sheets into parts for computer chassis. He was making three bends in each part and had finished approximately 80 parts. Just before the accident, he had finished a part, measured it, and found that the part was not within the specifications. He moved the foot pedal to the side and reached to the back gauge with his right hand to make an adjustment. As he was adjusting the back gauge, the ram came down and struck him on his right wrist. His wrist became caught between the ram and the lower die and was crushed. He was hospitalized for 2 days with his injury.
Keywords: PRESS BRAKE, LOCKOUT, CRUSHED, STRUCK BY, PRESS OPERATOR, PRESS, RAM, WRIST
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307456251 | Hospitalized injury | Other | Punching and stamping press machine operators |