Translate
Inspection Detail
Inspection: 307398693 - Design Workshops
Inspection Information - Office: San Francisco District Office
Site Address:
Design Workshops
2850 Broadway St.
San Francisco, CA 94115
Mailing Address:
486 Lesser St., Oakland, CA 94601
Union Status: Union
SIC:1751
NAICS: 238130/Framing Contractors
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 03/05/2008
Planning Guide: Safety-Manufacturing
Emphasis: S:Construction (Cship)
Case Closed: 02/11/2009
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 361570658 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | 2 | |||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $16,200 | $0 | $0 | $160 | $0 | $16,360 |
| Current Penalty | $2,925 | $0 | $0 | $0 | $0 | $2,925 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 1512 B | 03/10/2008 | 04/12/2008 | $0 | $160 | $0 | 03/24/2008 | D - Govt Dismissed | Citation has been deleted. |
| 2. | 02001 | Serious | 4296 A | 03/10/2008 | 03/13/2008 | $2,925 | $16,200 | $0 | 03/24/2008 | F - Formal Settlement |
Investigation Summary
On October 15, 2007, Employee #1, a journeyman carpenter, was using a DeWalt saw, model DW744, with a 10 in. blade to rip a one-inch thick by 28 in. wide piece of particle board. He was free-handing the board against the fence. He was finishing a plunge cut when he reached with his right hand to the left lower front of the saw to switch it off. His hand contacted the saw blade and the tip of his left little finger was amputated, and his third and fourth fingers were lacerated. The plunge operation was a common practice at this workplace. Although a saw guard, spreader, kickback, and push stick were available, none of them was in use. The employer was cited for an accident-related violation, serious, of T8CCR 4296a, for lack of a suitable jig when doing a plunge cut on the table saw, when a standard guard could not be used. Employee #1 knew how to use the available jig saw, hand coping, saw drill, and chisel as an alternate method to achieve the cut.
Keywords: AMPUTATED, CARPENTER, FINGER, GUARD, WORK RULES, STRUCK AGAINST, CONSTRUCTION, SAW, LACERATION, TABLE SAW
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307398693 | Hospitalized injury | Amputation | Carpenters |