Translate
Inspection Detail
Inspection: 307390765 - Pioneer Contractors, Inc.
Inspection Information - Office: San Francisco District Office
Site Address:
Pioneer Contractors, Inc.
1485 Armstrong Avenue
San Francisco, CA 94124
Mailing Address:
, , 00000
Union Status: Union
SIC:1761
NAICS: 238160/Roofing Contractors
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 09/23/2004
Planning Guide: Safety-Construction
Emphasis: S:Construction (Cship)
Case Closed: 03/20/2007
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362198301 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $14,400 | $0 | $0 | $0 | $0 | $14,400 |
| Current Penalty | $0 | $0 | $0 | $2,000 | $0 | $2,000 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 4184 B | 02/04/2005 | 02/17/2005 | $2,000 | $14,400 | $0 | 02/11/2005 | F - Formal Settlement |
Investigation Summary
At approximately 11:00 a.m. on September 9, 2004, Employee #1 and a coworker were operating a RAS TURBObend 9CNC Bender, an electrically powered machine for bending and folding sheet metal into shapes for roofing operations. The machine had an upper beam that clamped down on the sheet metal and a lower folding beam that swung around a pivot axis and folded the sheet metal along the desired bend. The two beams were controlled by two separate foot pedals. The coworker was operating the foot pedals while Employee #1 was at the other end of the machine aligning the work piece before each bending operation. They were working on a narrow piece of sheet metal, approximately 4 inches wide by 10 feet long. After the work piece was positioned under the upper beam, the coworker, seeing that the material was in place and the machine area was clear, stepped on the pedal that controlled the upper beam. As this occurred, Employee #1 realigned the work piece. When he did this, his right index finger became caught under the beam as it clamped the metal. His finger was amputated, and he was hospitalized for his injury.
Keywords: AMPUTATED, FINGER, MACHINE OPERATOR, BENDING MACHINE, CAUGHT BETWEEN, CRUSHED, ROOFER
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307390765 | Hospitalized injury | Amputation | Roofers |