Translate
Inspection Detail
Inspection: 307187773 - Lefiell Manufacturing Company
Inspection Information - Office: Monrovia District Office
Site Address:
Lefiell Manufacturing Company
13700 Firestone Blvd.
Santa Fe Springs, CA 90670
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3499
NAICS: 332999/All Other Miscellaneous Fabricated Metal Product Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 08/08/2008
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 10/03/2009
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101803997 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 5 | 6 | |||
| Current Violations | 6 | 6 | ||||
| Initial Penalty | $18,000 | $0 | $0 | $4,440 | $0 | $22,440 |
| Current Penalty | $0 | $0 | $0 | $6,975 | $0 | $6,975 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 A | 08/08/2008 | 08/18/2008 | $0 | $840 | $0 | 09/08/2008 | F - Formal Settlement | |
| 2. | 01002 | Other | 3314 G02 A | 08/08/2008 | 08/18/2008 | $0 | $900 | $0 | 09/08/2008 | F - Formal Settlement | |
| 3. | 01003 | Other | 3314 H | 08/08/2008 | 08/18/2008 | $0 | $900 | $0 | 09/08/2008 | F - Formal Settlement | |
| 4. | 01004 | Other | 3314 J01 | 08/08/2008 | 08/18/2008 | $900 | $900 | $0 | 09/08/2008 | F - Formal Settlement | |
| 5. | 01005 | Other | 3328 B | 08/08/2008 | 08/18/2008 | $0 | $900 | $0 | 09/08/2008 | F - Formal Settlement | |
| 6. | 02001 | Other | 3273 I | 08/08/2008 | 08/18/2008 | $6,075 | $18,000 | $0 | 09/08/2008 | F - Formal Settlement |
Investigation Summary
At approximately 2:30 on February 12, 2008, Employee #1, a machine operator, was being trained on the FENN 5F Manually-Fed Swaging Machine by a coworker. He was swaging aluminum tubing, and the parts measured 2.5-inches outside diameter by 0.120-inch wall thickness by 83-inches long. Employee #1 ran several through the swager, shut off the machine and began to retract the tube/material from the swager. Employee #1, under the coworker's supervision, did not wait until the swaging machine stopped rotating/moving before retracting the part to remove it. The part/material became dislodged and struck him in the head. He had no recollection of the event. There were no guards installed on the swager to shield the operator, and it did not have a door or hatch where the parts/materials fed into the machine. Operating the machine without the door/hatch resulted in the tubular parts contacting the protruding bolts on the face of the swager and caused it to dislodge from the swaging machine. Employee #1 sustained a fractured skull and was transported to a local medical center, where he stayed for eight days.
Keywords: FRACTURE, HEAD, ALUMINUM PROCESSING, MACHINE OPERATOR, LOCKOUT, SKULL, STRUCK BY, CONCUSSION, FLYING OBJECT, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307187773 | Hospitalized injury | Fracture | Occupation not reported |