Translate
Inspection Detail
Inspection: 307167841 - Hanmar Corporation Hermann'S Metal Spinning
Inspection Information - Office: Long Beach District Office
Site Address:
Hanmar Corporation Hermann'S Metal Spinning
520 State Street
Glendale, CA 91203
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3541
NAICS: 333512/Machine Tool (Metal Cutting Types) Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 07/31/2006
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 07/14/2007
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101059772 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 4 | 4 | ||||
| Current Violations | 4 | 4 | ||||
| Initial Penalty | $34,085 | $0 | $0 | $0 | $0 | $34,085 |
| Current Penalty | $16,560 | $0 | $0 | $0 | $0 | $16,560 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 23400023 | 07/28/2006 | 08/09/2006 | $1,800 | $4,950 | $0 | 08/24/2006 | F - Formal Settlement | |
| 2. | 02001 | Serious | 4002 A | 07/28/2006 | 08/09/2006 | $180 | $4,950 | $0 | 08/24/2006 | F - Formal Settlement | |
| 3. | 03001 | Serious | 4070 A | 07/28/2006 | 08/09/2006 | $180 | $6,185 | $0 | 08/24/2006 | F - Formal Settlement | |
| 4. | 04001 | Serious | 3384 B | 07/28/2006 | 08/09/2006 | $14,400 | $18,000 | $0 | 08/24/2006 | F - Formal Settlement |
Investigation Summary
On March 6, 2006, Employee #1, a programmer and supervisor of the Automatic Spinning Department with Hermann's Metal Spinning (a spinning and press sheet-form metal manufacturer), was conducting a production set-up operation. He was working alone. The set up process entailed tapping a 0.375-in. thread in a 9-in. aluminum sampling tube. While finishing the set-up operation, he released the lever of a drill press (Rockwell Manufacturing Model Number P5-655, Serial Number 1509891) and loosened the three-jaw chuck at the base of the drill press to take a work piece from its position. The spinning 0.375-in. drill bit caught a finger of his gloved right hand. Employee #1 was transported to Glendale Memorial Occupational Medical Center and then transferred to a hand specialist, who amputated a portion of his finger. Employee #1 had been wearing the glove on his hand to prevent infection of a previous wound.
Keywords: ROTATING PARTS, AMPUTATED, FINGER, GLOVE, CAUGHT BY, DRILL PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307167841 | Non Hospitalized injury | Amputation | Tool programmers, numerical control |