Translate
Inspection Detail
Inspection: 305474231 - A & R Engineering Co Inc
Inspection Information - Office: Long Beach District Office
Site Address:
A & R Engineering Co Inc
1053 E Bedmar St
Carson, CA 90746
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3728
NAICS: 336413/Other Aircraft Parts and Auxiliary Equipment Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 12/30/2003
Emphasis:
Case Closed: 09/13/2010
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362405326 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 2 | 6 | 8 | |||
| Current Violations | 2 | 3 | 5 | |||
| Initial Penalty | $20,585 | $0 | $0 | $1,570 | $0 | $22,155 |
| Current Penalty | $1,100 | $0 | $0 | $960 | $0 | $2,060 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 B | 01/12/2004 | 02/05/2004 | $275 | $275 | $0 | 08/06/2004 | F - Formal Settlement | |
| 2. | 01002 | Other | 23400023 | 01/12/2004 | 01/15/2004 | $0 | $135 | $0 | 08/06/2004 | F - Formal Settlement | Citation has been deleted. |
| 3. | 01003 | Other | 3664 A | 01/12/2004 | 01/15/2004 | $0 | $135 | $0 | 08/06/2004 | F - Formal Settlement | Citation has been deleted. |
| 4. | 01004 | Other | 4190 B | 01/12/2004 | 02/05/2004 | $0 | $135 | $0 | 08/06/2004 | F - Formal Settlement | Citation has been deleted. |
| 5. | 01005 | Other | 4192 A | 01/12/2004 | 01/15/2004 | $410 | $550 | $0 | 08/06/2004 | F - Formal Settlement | |
| 6. | 01006 | Other | 4202 B | 01/12/2004 | 02/05/2004 | $275 | $340 | $0 | 08/06/2004 | F - Formal Settlement | |
| 7. | 02001 | Serious | 4206 A | 01/12/2004 | 01/29/2004 | $550 | $6,185 | $0 | 08/06/2004 | F - Formal Settlement | |
| 8. | 03001 | Serious | 4197 A | 01/12/2004 | 01/29/2004 | $550 | $14,400 | $0 | 08/06/2004 | F - Formal Settlement |
Investigation Summary
At approximately 1:00 p.m. on September 16, 2003, an employee was operating a 10 ton, full revolution punch press manufactured by Standun Inc., Benchmaster Products Division, Model Number 182, and Serial Number 63189. The machine was being used with flat dies to partially remove the crimp in small metal plates. The employees used her hands to place and remove the small plates into and out of the die area. The employee activated the press by using a two hand trip system. None of the other point of operation devices or guards was in use. After the employee and the operator who had used the machine earlier that morning had performed 1700 cycles, the machine double tripped, coming down on the fingers of the employee's right hand. The employee lost the first phalanx of the middle finger, the first 2 phalanges of the ring finger, and had the index and little fingers fractured. Two hundred additional cycles of the press could not duplicate the double trip. The employee was not hospitalized.
Keywords: AMPUTATED, FINGER, CAUGHT BY, PUNCH PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 305474231 | Non Hospitalized injury | Amputation | Punching and stamping press machine operators |