Translate
Inspection Detail
Inspection: 305352932 - Smi Millwork
Inspection Information - Office: Santa Ana District Office
Site Address:
Smi Millwork
2116 Chestnut Ave
Santa Ana, CA 92703
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:2431
NAICS: 321911/Wood Window and Door Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 04/08/2004
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 10/15/2004
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362369324 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 3 | 3 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $0 | $0 | $0 | $5,550 | $0 | $5,550 |
| Current Penalty | $0 | $0 | $0 | $275 | $0 | $275 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 04/09/2004 | 04/27/2004 | $0 | $5,000 | $0 | I - Informal Settlement | Citation has been deleted. | |
| 2. | 01002 | Other | 3203 A | 04/09/2004 | 04/27/2004 | $0 | $275 | $0 | I - Informal Settlement | Citation has been deleted. | |
| 3. | 01003 | Other | 461 A | 04/09/2004 | 04/27/2004 | $275 | $275 | $0 | - |
Investigation Summary
On November 20, 2003, Employee #1 was working for a manufacturer of wooden doors, windows and other architectural woodwork. Employee #1 was using a drill press manufactured by Jet Equipment and Tools, Model Number JDP-17MF, Stock Number 354169, Serial Number 6084869. Employee #1 was using a hollow bit to carve out wooden plugs with .75 in. diameter from a 2-in. by 2-in. by 17-in. piece of lumber. The plugs were used for covering screw holes in the wood products manufactured at this facility. At the time of the accident, Employee #1 was controlling the vertical movement of the cutting bit with his right hand and was holding the piece of lumber in his left hand, when the piece of lumber jumped out of his hand because of a knot in the wood. His left hand contacted the rotating bit and his thumb was severed at a 45 degree angle. Employee #1 lost approximately half of his thumbnail and part of the bone under it. The amputated tip was not able to be reattached. Employee #1 was taken to the hospital, where he was treated for his injuries. Employee #1 was permanently disfigured.
Keywords: AMPUTATED, DRILL OPERATOR, WOOD SLAB, EQUIPMENT OPERATOR, THUMB, LUMBER, DRILL PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 305352932 | Non Hospitalized injury | Amputation | Miscellaneous precision woodworkers |