Translate
Inspection Detail
Inspection: 305316267 - Holley Moulding Inc
Inspection Information - Office: Medford
Site Address:
Holley Moulding Inc
800 Sw Hastings
Sutherlin, OR 97479
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:2431
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 11/29/2002
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 09/17/2003
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 6 | 6 | ||||
| Current Violations | 6 | 6 | ||||
| Initial Penalty | $2,970 | $0 | $0 | $0 | $0 | $2,970 |
| Current Penalty | $2,970 | $0 | $0 | $0 | $0 | $2,970 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001A | Serious | 19100147 D04 I | 01/22/2003 | 02/01/2003 | $1,250 | $1,250 | $0 | - | ||
| 2. | 01001B | Serious | 19100147 C07 IIIB | 01/22/2003 | 02/01/2003 | $0 | $0 | $0 | - | ||
| 3. | 01002 | Serious | 701076007 A | 01/22/2003 | 02/01/2003 | $500 | $500 | $0 | - | ||
| 4. | 01003 | Serious | 19100213 I01 | 01/22/2003 | 01/03/2003 | $500 | $500 | $0 | - | ||
| 5. | 01004 | Serious | 19100213 I01 | 01/22/2003 | 01/03/2003 | $210 | $210 | $0 | - | ||
| 6. | 01005 | Serious | 19100219 I02 | 01/22/2003 | 01/03/2003 | $210 | $210 | $0 | - | ||
| 7. | 01006A | Serious | 19100147 D06 | 01/22/2003 | 02/01/2003 | $300 | $300 | $0 | - | ||
| 8. | 01006B | Serious | 19100147 C05 IID | 01/22/2003 | 02/01/2003 | $0 | $0 | $0 | - |
Investigation Summary
Employee #1 was operating resaw number 2 when the quality control employee asked him to adjust resaw number 1 because it was sniping (mis-cutting) the ends of blank moulding stock. The employee inspected the blanks from resaw number 1 and determined that it needed to be adjusted. The employee adjusted the feed rolls and bungee cord tensioning device. While doing this, his gloved left hand was pulled into the point of operation and made contact with the rotating bandsaw blade. The employee was transported to a local hospital where he received medical treatment.
Keywords: BANDSAW, STRUCK AGAINST, SAW, POINT OF OPERATION, BLADE, HAND, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 305316267 | Hospitalized injury | Amputation | Laborers, except construction |