Inspection Detail
Inspection: 302014972 - Bottcher America Corporation
Inspection Information - Office: Department Of Labor, Licensing, And Regulation Division Of Labor And Industry Maryland Occupational Safety And Health
Site Address:
Bottcher America Corporation
4600 Mercedes Drive
Belcamp, MD 21017
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3069
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 02/26/1998
Emphasis:
Case Closed: 05/29/1998
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 100963388 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $1,600 | $0 | $0 | $0 | $0 | $1,600 |
| Current Penalty | $700 | $0 | $0 | $0 | $0 | $700 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100212 A01 | 04/10/1998 | 04/13/1998 | $700 | $1,600 | $0 | I - Informal Settlement |
Investigation Summary
Employee #1 was using a Victor lathe to trim a rubber roll. He had trimmed about 10 in., working from the tail end toward the head of the machine. The carriage was set to run from right to left. Employee #1 was removing trimmings from under the roll and the bed of the lathe when his right hand became caught between the roll and the bed. He sustained injuries to his thumb and to his index and middle fingers, but did not require hospitalization.
Keywords: LATHE, FINGER, WORK RULES, THUMB, ROLLER--MACH/PART, CAUGHT BETWEEN, LACERATION, NIP POINT, HAND, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 302014972 | Non Hospitalized injury | Cut/Laceration | Lathe and turning machine operators |
Translate