TranslateInspection Detail
Inspection: 300854932 - Dynamic Cooking Systems
Inspection Information - Office: Ca Santa Ana District Office
Site Address:
Dynamic Cooking Systems
5800 Skylab Rd
Huntington Beach, CA 92647
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3631
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 10/07/2002
Planning Guide: Safety-Manufacturing
Emphasis:
Close Case:03/29/2005
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362359325 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 3 | 1 | 4 | |||
| Current Violations | 3 | 1 | 4 | |||
| Initial Penalty | $33,300 | $0 | $850 | $0 | $0 | $34,150 |
| Current Penalty | $24,500 | $0 | $850 | $0 | $0 | $25,350 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Repeat | 342 A | 10/07/2002 | 10/10/2002 | $850 | $850 | $0 | 10/24/2002 | W - Empr Withdrew | |
| 2. | 02001 | Serious | 4227 B | 10/07/2002 | 10/10/2002 | $18,000 | $18,000 | $0 | 10/24/2002 | W - Empr Withdrew | |
| 3. | 03001 | Serious | 4227 A | 11/07/2002 | 11/29/2002 | $765 | $7,650 | $0 | 04/29/2003 | F - Formal Settlement | |
| 4. | 04001 | Serious | 4214 A | 11/07/2002 | 11/29/2002 | $5,735 | $7,650 | $0 | 04/29/2003 | F - Formal Settlement |
Investigation Summary
At approximately 12:40 a.m. on May 8, 2002, an employee was seriously injured The employer manufactures cooking grills and barbecue equipment, where sheet metal work is performed using press brakes and metal shears. The injured employee was operating an Amada 8-ft metal shear, Model M-2545, Serial Number 2502106, in the manufacturing area, when his right ring fingertip was crushed under a hold-down on this machine. The hold-down cup guards exceeded the allowable opening on the table. The employee amputated about 0.5 inch of his fingertip because of this accident.
Keywords:amputated, shear, sheet metal, press brake, finger, guard, metal shop, struck by
| # | Inspection | Age | Sex | Degree | Nature | Occupation |
|---|---|---|---|---|---|---|
| 1 | 300854932 | Hospitalized injury | Amputation | Sheet metal workers |