Powered by GoogleTranslate

Inspection Detail

Inspection: 18852467 - French/Bray, Inc.

Inspection Information - Office: Department Of Labor, Licensing, And Regulation Division Of Labor And Industry Maryland Occupational Safety And Health

 

Inspection Nr: 18852467
Report ID: 0352440
Date Opened: 07/17/1986

Site Address:
French/Bray, Inc.
6731 Baymeadow Drive
Gle Burnie, MD 21061

Mailing Address:
, , 00000

Union Status: Union

SIC:2759

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 07/21/1986

Planning Guide: Safety-Manufacturing

Emphasis:

Case Closed: 09/03/1986


Related Activity
Type Activity Nr Safety Health
Accident 360747679
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $0 $0 $0 $0 $0 $0
Current Penalty $0 $0 $0 $0 $0 $0
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 19100132 A 08/11/1986 08/14/1986 $0 $0 $0 -  

Investigation Summary

Investigation Nr: 14299952
Event: 07/03/1986
EMPLOYEE'S FOOT CAUGHT BETWEEN ROLLERS OF A PRESS

EMPLOYEE #1 WAS CLEANING A HARRIS M-110, 6 COMPARTMENT WEB PRESS, SERIAL NUMBER 01953647. HE REMOVED THE LOWER GUARD AND ATTACHED A 2 1/4 INCH BY 2 1/4 INCH BY 29 1/2 INCH SQUEEGEE AND TRAY. THE EMPLOYEE NEGLECTED TO REPLACE THE WIRE GUARD. LATER, IN ORDER TO APPLY ADDITIONAL PRESSURE, HE PLACED HIS FOOT ON THE SQUEEGEE. HIS FOOT BECAME CAUGHT IN THE 3/16 INCH OPENING BETWEEN THE UPPER RUBBER ROLLER AND THE LOWER STEEL ROLLER. BOTH ROLLERS ARE 3 1/4 INCH IN DIAMETER. THE RUBBER ROLLER IS 27 INCHES LONG. THE STEEL ROLLER IS 28 INCHES LONG. EMPLOYEE #1 WAS FULLY TRAINED AND EXPERIENCED IN PRESS OPERATIONS. THERE WERE NO WITNESSES TO THE ACCIDENT. EMPLOYEE #1 SUFFERED CUTS AND LACERATIONS TO THE FRONT OF HIS RIGHT FOOT AND A FRACTURED BIG TOE. HE ADMITTED THAT HE HAD BEEN TRAINED TO LEAVE ALL GUARDS IN PLACE. THE FOLLOWING FACTORS CONTRIBUTED TO THE ACCIDENT: 1) EMPLOYEE MISJUDGEMENT OF A HAZARDOUS CONDITION, 2) DISOBEDIENCE, IE. TAKING SHORT CUTS, AND, 3) WEARING OF IMPROPER SHOES.

Keywords: PRINTING PRESS, WORK RULES, CLEANING, SLIP, CAUGHT BY, ROLLER--MACH/PART, CRUSHED, SAFETY SHOE, UNGUARDED, FOOT

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 18852467 Hospitalized injury Cut/Laceration Printing machine operators
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close