Inspection Detail
Inspection: 18573030 - Hunt Manufacturing, Co.
Inspection Information - Office: Nc Department Of Labor - Raleigh
Site Address:
Hunt Manufacturing, Co.
Speedball Rd.
Statesville, NC 28677
Mailing Address:
P. O. Box 5030, Statesville, NC 28677
Union Status: NonUnion
SIC:3579
NAICS: 0
Inspection Type: Complaint
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 01/23/1990
Emphasis:
Case Closed: 07/20/1990
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Complaint | 71156848 | Yes |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 9 | 4 | 13 | |||
| Current Violations | 9 | 4 | 13 | |||
| Initial Penalty | $2,460 | $0 | $0 | $0 | $0 | $2,460 |
| Current Penalty | $2,460 | $0 | $0 | $0 | $0 | $2,460 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100132 A | 05/15/1990 | 06/02/1990 | $240 | $240 | $0 | - | ||
| 2. | 01002 | Serious | 19100133 A01 | 05/15/1990 | 06/02/1990 | $240 | $240 | $0 | - | ||
| 3. | 01003 | Serious | 19100217 B03 | 05/17/1990 | 07/03/1990 | $300 | $300 | $0 | P - Petition to Mod Abatement | ||
| 4. | 01004A | Serious | 19100217 B04 I | 05/17/1990 | 06/19/1990 | $300 | $300 | $0 | - | ||
| 5. | 01004B | Serious | 19100217 B04 II | 05/17/1990 | 06/19/1990 | $0 | $0 | $0 | - | ||
| 6. | 01005 | Serious | 19100217 B04 III | 05/17/1990 | 07/03/1990 | $240 | $240 | $0 | P - Petition to Mod Abatement | ||
| 7. | 01006 | Serious | 19100217 B08 II | 05/17/1990 | 06/19/1990 | $240 | $240 | $0 | - | ||
| 8. | 01007 | Serious | 19100217 C01 I | 05/17/1990 | 07/03/1990 | $300 | $300 | $0 | P - Petition to Mod Abatement | ||
| 9. | 01008A | Serious | 19100217 C02 IA | 05/17/1990 | 06/19/1990 | $360 | $360 | $0 | - | ||
| 10. | 01008B | Serious | 19100217 D01 II | 05/17/1990 | 05/23/1990 | $0 | $0 | $0 | - | ||
| 11. | 01008C | Serious | 19100217 E01 I | 05/17/1990 | 06/19/1990 | $0 | $0 | $0 | - | ||
| 12. | 01009 | Serious | 19100217 D09 IV | 05/17/1990 | 07/19/1990 | $240 | $240 | $0 | P - Petition to Mod Abatement | ||
| 13. | 02001 | Other | 19100215 A04 | 05/17/1990 | 05/23/1990 | $0 | $0 | $0 | - | ||
| 14. | 02002 | Other | 19100215 B09 | 05/17/1990 | 05/23/1990 | $0 | $0 | $0 | - | ||
| 15. | 02003 | Other | 19100217 G | 05/17/1990 | 05/21/1990 | $0 | $0 | $0 | - | ||
| 16. | 02004 | Other | 19100305 B02 | 05/17/1990 | 05/23/1990 | $0 | $0 | $0 | - |
Investigation Summary
At approximately 9:30 a.m. on November 2, 1989, Employee #1, a press operator, was operating an 18 ton full-revolution mechanical power press set up for continuous stroking and feeding. The machine jammed with parts in the die. Employee #1 turned the machine off, knocked it out of gear, removed the guard, and reached in with her hand (by-passing hand tools) to retrieve the jammed parts. The press cycled and the ram came down and closed on her right thumb. She sustained lacerations to both the dermis and epidermis of the right thumb. There were also severe bruises to tendons and ligaments. There were no broken bones or amputations. Employee #1 was treated and released from the hospital the same day of the injury. As of January 29, 1990, she had not returned to work. Causal factors include an inadequate guard (the guard did not utilize fasteners which would prevent the operator from readily moving the guard at will) and a lack of enforcement of the use of tools to remove scrap from the point of operation.
Keywords: POWER PRESS, WORK RULES, THUMB, LACERATION, STRUCK BY, PRESS OPERATOR, UNGUARDED, CONTUSION, RAM
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 18573030 | Non Hospitalized injury | Cut/Laceration | Punching and stamping press machine operators |
Translate