Inspection Detail
Inspection: 18572222 - Templon Mills
Inspection Information - Office: Nc Department Of Labor - Raleigh
Site Address:
Templon Mills
Hwy. 150 By-Pass
Mooresville, NC 28115
Mailing Address:
P. O. Box 480, Mooresville, NC 28115
Union Status: NonUnion
SIC:2281
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 08/18/1989
Emphasis:
Case Closed: 10/24/1989
Type | Activity Nr | Safety | Health |
---|---|---|---|
Accident | 360487235 |
Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
---|---|---|---|---|---|---|
Initial Violations | 2 | 2 | ||||
Current Violations | 2 | 2 | ||||
Initial Penalty | $600 | $0 | $0 | $0 | $0 | $600 |
Current Penalty | $600 | $0 | $0 | $0 | $0 | $600 |
FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
# | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
---|---|---|---|---|---|---|---|---|---|---|---|
1. | 01001 | Serious | 19100179 G01 V | 10/17/1989 | 10/23/1989 | $360 | $360 | $0 | - | ||
2. | 01002A | Serious | 19100179 G02 III | 10/17/1989 | 10/23/1989 | $240 | $240 | $0 | - | ||
3. | 01002B | Serious | 19100179 J02 IV | 10/17/1989 | 10/23/1989 | $0 | $0 | $0 | - |
Investigation Summary
At approximately noon on June 27, 1989, Employee #1 was working with two other employees to remove a loaded carrier from a dye machine. They were utilizing a hoisting machine that was attached to an overhead crane that was pendant controlled from the floor. Employee #1 was on the west side of the machine and the other two employees were on the east side. The hoist was hooked to the carrier of the machine. The load (approximately 2,500 lbs.) was lifted out and was approximately waist high when one of the employees either pushed the wrong button on the pendant control or pushed the load. The carrier knocked Employee #1 against the machine, pinning him there. The other employee ran around the load to see what his problem was. Upon seeing him pinned against the machine by the load, one employee ran to remove the load. Employee #1 was hospitalized one night for observation and testing. The employee suffered severe internal bruises in the pelvis and lumbar area, lost 36 workdays, and is estimated to lose approximately 20 more days. Causal factors were lack of a pendant control box to identify each function. In addition, the company was not maintaining records of inspections of the crane.
Keywords: REMOTE CONTROL, PINNED, BACK, INEXPERIENCE, OVERHEAD CRANE, PELVIS, DYE MACHINE, MECH MALFUNCTION, CONTUSION
# | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
---|---|---|---|---|---|---|
1 | 18572222 | Hospitalized injury | Bruise/Contus/Abras | Miscellaneous textile machine operators |