Powered by GoogleTranslate

Inspection Detail

Case Status: CLOSED

Inspection: 1535163.015 - Sonoco (Spg) Incorporated

Inspection Information - Office: Appleton Area Office

 

Inspection Nr: 1535163.015
Report ID: 0521100
Date Opened: 06/09/2021

Site Address:
Sonoco (Spg) Incorporated
69 Washington St.
Menasha, WI 54952

Mailing Address:
69 Washington St., Menasha, WI 54952

Union Status: Union

SIC:

NAICS: 322121/Paper (except Newsprint) Mills


Inspection Type: Referral

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 06/09/2021

Emphasis:

Case Closed: 10/29/2021


Related Activity
Type Activity Nr Safety Health
Referral 1773183 Yes
Case Status: CLOSED
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $8,290 $0 $0 $0 $0 $8,290
Current Penalty $8,290 $0 $0 $0 $0 $8,290
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001A Serious 19100147 C04 II 09/02/2021 $8,290 $8,290 $0 Z - Issued  
2. 01001B Serious 19100147 D 09/02/2021 10/08/2021 $0 $0 $0 Z - Issued  

Investigation Summary

Investigation Nr: 137950.015
Event: 05/16/2021
Employee degloves finger when removing nozzle in unguarded r

At 2:00 p.m. on May 16, 2021, an employee working as a machine operator for a paper mill was preparing to remove a deckle nozzle from the #1 Paper Machine. The deckle nozzle is part of a spray system that creates a crisp edge on the product being formed. The machine had a sheet break due to blowing. While coworkers on the the dry end crew were cleaning up the paper and putting a rope on, the employee went to the back side of Vat #9 to change the nozzle. The crew slowed the machine down to thread speed (about 250 feet per minute) to allow the felt to continue to rotate around the equipment. The deckle nozzle is located just above the 42-inch by 145-inch MULTIPLI Wet/Dry Counterflow Skip Decked Cylinder Vat, which is equipped with Ultra Plane II Inlets, Dry Vat beam assemblies, and rectifier boards and which contains a water/chemical system which was about 120 degrees Fahrenheit. The employee was wearing green insulated rubber gloves to unscrew the deckle nozzle. Once the employee had removed the nozzle, he almost dropped it and reacted to grab it, at which point he caught his glove on a cylinder. The cylinder had small perforated holes and the employee felt a nip as his right hand was pulled towards the couch nip roller system. The employee pulled his hand free and went to the nearest coworker for assistance before being taken to the emergency room. The employee received medical treatment without hospitalization for a degloved thumb requiring surgery and small fractures to the ring and middle fingertips.

Keywords: Amputated, Amputation, Caught Between, Caught By, Degloving, Energized, Finger, Fingertip, Fracture, Glove, Hand, Instantaneous amputation, Lack of Work Procedures, Lockout, Lockout/Tagout, Machine Guarding, Machine operator, Nip Point, Paper Machine, Partial Amputation, Pinch Point, Pinched, Power Roller, Pulled In, Removal, Removing, Roller--Mach/Part, Thumb, Traumatic Amputation, Vat

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 1535163.015 64 M Non Hospitalized injury Miscellaneous machine operators, n.e.c.
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close