Translate
Inspection Detail
Inspection: 14860662 - New Era Custom Design & Cabinet Works
Inspection Information - Office: Department Of Labor, Licensing, And Regulation Division Of Labor And Industry Maryland Occupational Safety And Health
Site Address:
New Era Custom Design & Cabinet Works
202 Center Street
Mt Airy, MD 21771
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:2511
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 10/26/1984
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 03/04/1985
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 360623516 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 2 | 2 | ||||
| Current Violations | 2 | 2 | ||||
| Initial Penalty | $610 | $0 | $0 | $0 | $0 | $610 |
| Current Penalty | $305 | $0 | $0 | $0 | $0 | $305 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100213 C01 | 11/19/1984 | 11/22/1984 | $170 | $340 | $0 | 12/06/1984 | F - Formal Settlement | |
| 2. | 02001 | Serious | 19100213 H01 | 11/19/1984 | 11/22/1984 | $135 | $270 | $0 | 12/06/1984 | F - Formal Settlement |
Investigation Summary
EMPLOYEE #1 WAS CUTTING PLASTIC LAMINATE ON A POWERMATIC TABLE SAW WITH 10 INCH BLADE, MODEL #88, SERIAL NO. 4661109. THE STOCK WAS APPROXIMATELY 16 INCHES LONG, 1 1/2 INCHES WIDE, AND 1/16 INCH THICK. THE STOCK WAS BEING RIPPED INTO PIECES 5/8 INCH WIDE. EMPLOYEE #1 HAD 6 PIECES OF PLASTIC LAMINATE TO CUT AND WAS USING THE FOLLOWING PROCEDURE TO CUT IT. HE WAS PUSHING THE STOCK THROUGH THE BLADE WITH HIS RIGHT HAND UNTIL HIS RIGHT HAND WAS 3 TO 4 INCHES FROM THE BLADE. HE THEN REACHED OVER THE BLADE WITH HIS LEFT HAND AND PULLED THE PLASTIC LAMINATE THE REST OF THE WAY THROUGH THE BLADE. AFTER COMPLETING THE CUT HE ALLOWED THE PIECES TO FALL OFF THE END OF THE TABLE AND THEN BROUGHT HIS LEFT HAND BACK OVER THE BLADE TO HIS SIDE. AFTER CUTTING THE LAST PIECE OF PLASTIC LAMINATE, HE BROUGHT HIS LEFT HAND BACK OVER THE SAW BLADE. HIS LEFT THUMB CONTACTED THE TOP OF THE BLADE, RESULTING IN A CUT TO THE UNDERSIDE OF HIS THUMB REQUIRING 8 STITCHES. THE TABLESAW WAS EQUIPPED WITH A FENCE FOR GUIDING THE STOCK BEING CUT. THE TABLE SAW WAS NOT EQUIPPED WITH A GUARD TO COVER THAT PORTION OF THE BLADE ABOVE THE TABLE AND ABOVE THE STOCK BEING CUT. THE ACCIDENT OCCURED ON 10/12/84 AT APPROX. 11:45. EMPLOYEE #1 HAD BEEN WITH THE COMPANY ABOUT ONE MONTH AT THE TIME OF THE ACCIDENT. HE HAD RECEIVED ON THE JOB TRAINING FROM THE COMPANY PRESIDENT FOR THIS PARTICULAR OPERATION. EMPLOYEE #1 EXPLAINED TO ME THAT HE HAD BEEN TOLD TO HAVE ANOTHER PERSON PULL THE PLASTIC LAMINATE THROUGH THE BLADE OR PICK IT STRAIGHT UP OVER THE BLADE, TURN IT OVER AND THEN COMPLETE THE CUT BY PUSHING THE UNCUT END THROUGH THE BLADE. PRIOR TO BEGINNING WORK WITH THE COMPANY EMPLOYEE #1 HAD HAD 3YRS. OF CABINET MAKING IN VOCATIONAL SCHOOL AND ANOTHER YEAR OF EXPERIENCE IN CABINET MAKING.
Keywords: GUARD, THUMB, LACERATION, BLADE, TABLE SAW
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 14860662 | Hospitalized injury | Cut/Laceration | Cabinet makers and bench carpenters |