Inspection Detail
Inspection: 1393653.015 - Carlisle Construction Materials, Llc
Inspection Information - Office: Jackson Area Office
Site Address:
Carlisle Construction Materials, Llc
1201 N. Scott St.
Senatobia, MS 38668
Mailing Address:
1201 N. Scott St., Senatobia, MS 38668
Union Status: NonUnion
SIC:
NAICS: 326299/All Other Rubber Product Manufacturing
Inspection Type: Referral
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 04/11/2019
Emphasis: N:Amputate
Case Closed: 07/01/2019
Type | Activity Nr | Safety | Health |
---|---|---|---|
Referral | 1443540 | Yes |
Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
---|---|---|---|---|---|---|
Initial Violations | 1 | 2 | 3 | |||
Current Violations | 1 | 2 | 3 | |||
Initial Penalty | $9,661 | $0 | $0 | $904 | $0 | $10,565 |
Current Penalty | $5,797 | $0 | $0 | $542 | $0 | $6,339 |
FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
# | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
---|---|---|---|---|---|---|---|---|---|---|---|
1. | 01001 | Serious | 19100212 A01 | 05/20/2019 | 06/19/2019 | $5,797 | $9,661 | $0 | I - Informal Settlement | ||
2. | 02001 | Other | 19100028 B11 II | 05/20/2019 | 06/19/2019 | $0 | $0 | $0 | I - Informal Settlement | ||
3. | 02002 | Other | 19100147 C06 I | 05/20/2019 | 06/19/2019 | $542 | $904 | $0 | I - Informal Settlement |
Investigation Summary
At 4:15 a.m. on April 8, 2019, Employee #1, 33-year-old man, was working as a production coordinator for a firm that manufactured rubber roofs. He was helping a maintenance coworker work on an S1 Parkinson Winders Positran roll transfer system. The employee was aligning a winder roller along a track. He was moving the winder roller forward so that his coworker could see where to stop the winder cylinder. The maintenance coworker was positioned on the floor below. The employee was standing on an elevated platform operating the winder movement in a jog speed mode. He had his right hand positioned on a stationary enclosed guard housing, while he operated the control unit with his left hand. As the roll transfer system traveled toward him, the small finger on his right hand became caught between the roll transfer system and the guard housing. He suffered the amputation of the end of that finger. He was not hospitalized. The opening distance between the two was later estimated by a safety inspector to be less than 13 millimeters (0.5 inches). Operators of the roll transfer system worked from the platform and operated the control panel. There was no guarding to protect the area between the stationary guard housing and the roll transfer system. In an interview, an employer representative stated that he walked the plant floor throughout the day and that operators accessed the work platform at last once per shift to align or thread a new roll. Operators used the computer control panel to do this, with the machine in the jog or manual mode. The workers were in this area to align the material from time to time, but it was not a normal activity for them to do that. The safety inspector commented that the area around the roll transfer system had never been guarded. There was a small upright barrier guard on the floor but not at the level where the employee was injured as he aligned the winder roller along the track for his coworker.
Keywords: Amputated, Amputation, Caught In, Finger, Fingertip, Hand, Hand Control, Handrail, Lockout, Machine Guarding, Nip Point, Roller--Mach/Part, Stair
# | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
---|---|---|---|---|---|---|
1 | 1393653.015 | 33 | M | Non Hospitalized injury | Supervisors and proprietors, sales occupations |